Jump to content

Help installing Scorpion SA30 alarm!


MC_Bob

Recommended Posts

got these written down,cant remember exactly whats what but here goes.

 

fuel pump cut= bl+red in car (drivers kick panel) 2 blues on alarm

 

accessory=yellow in car (ignition harness) white + green on alarm

 

central locking=lock=thick yellow+red in car,b on alarm (not sure if b is brown or black?)

unlock= 1st thick white+red in car,b+w on alarm

 

door trigger=door pin wire,pink on alarm

 

boot release=thin b+red under boot switch,g+y on alarm

 

auto door lock= wire on brake pedal,brown on alarm?

 

indicators=blue+white and blue+red in first black multiplug on top of fusebox

 

main power i just connected straight to battery

 

earthed at bottom of a pillar.

 

hope this helps,not quite sure on some of the above so double check things.

Link to comment
Share on other sites

  • 1 month later...

Just finished it, buta problem has occurred. The alarm doesnt seem to know if a door has been opened, if I leave the window open, then arm the alarm and open a door through the window, it doesnt set it off.

Aswell, it auto arms itself as soon as you finish driving, and goes off.

 

I have a feeling its the pink wire for the door trigger, where should this be wired? I put it to the door switch on the frame.

 

Thanks for your help guys!

Link to comment
Share on other sites

All fixed, had to put the pink wire on a wire going up the A pillar.

 

The only thing now is, if you unlock the car, but open the handle too early, the car relocks, but the alarm thinks the car is unlocked. Any way of fixing this? Theres a few more wires not being used.

 

Cheers

Link to comment
Share on other sites

All fixed, had to put the pink wire on a wire going up the A pillar.

 

The only thing now is, if you unlock the car, but open the handle too early, the car relocks, but the alarm thinks the car is unlocked. Any way of fixing this? Theres a few more wires not being used.

 

dont open it too early lol

 

Cheers

 

 

Also, anyway to make the car deadlock? I noticed the alarm has a wire which gives out a -ve voltage when its armed, could this be for it?

 

Thanks!

 

think that could be used for a window closure kit or summin,does the output last for a certain time? like 45 sec?

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...