Jump to content

Prob After 2.0 Upgrade.


webbysdad

Recommended Posts

  • Replies 48
  • Created
  • Last Reply

Top Posters In This Topic

Pin 14 on the 60 pin EEC-V ECU's drives the temp gauge on the dash, so perhaps this oddball EEC-IV does the same. Give it a go!

 

 

Thanks for that info guys. Will have a look and see if there is a wire on pin 14. Looking at the "How to" about installing digi instruments it gives the impression that the temp gauge will work with the usual 2nd sensor ok, so will try it. If you have access to diagrams, perhaps you could see if there is any indication what the signal to the temp gauge is from the ecu please? Cheers.

Link to comment
Share on other sites

My son has had a look at his ecu and there is a white/red wire in pin 14, so we will get it out and see if it connects to the temp gauge!

If it does and the gauge will react to a resistive earth correctly we will go down the route of putting in the second sensorand wiring to suit.

He has got a loom from a "V" reg finesse that has analogue gauges which has a connection to the second sensor so might try that to see if

there is a connection that way. Will post up the result of these tests and the final configuration on here.

If possible, Stu or SteveB, if you have access to a Mondeo diagram, could you see if there is a connection from the ecu to temp gauge please?

 

Thanks for your info and help guys, much appreciated. :thumb:

Link to comment
Share on other sites

If possible, Stu or SteveB, if you have access to a Mondeo diagram, could you see if there is a connection from the ecu to temp gauge please?

 

Old random Mondeo pin-out:

 

http://di.cx/gallery/d/7056-1/eec_iv_01.jpg

Link to comment
Share on other sites

does this mean you've flogged the 2.0 ecu's in error lordjc? :O

 

PAA! think i still have one sum where, after market is the way forward. as OEM doesn't support things like throttle bodies, NOs, dual map and launch control etc :innocent:

so why you asking for one from a guy on passion ford??

Link to comment
Share on other sites

does this mean you've flogged the 2.0 ecu's in error lordjc? :O

 

PAA! think i still have one sum where, after market is the way forward. as OEM doesn't support things like throttle bodies, NOs, dual map and launch control etc :innocent:

so why you asking for one from a guy on passion ford??

he's a greedy beggar :thumb:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×
×
  • Create New...