Jump to content


Photo

Escort parts clearance


30 replies to this topic

#1 Trig

Trig
  • Gender:Male
  • Location:Near Kettering, Northants (Im a bloody southerner now!)
  • Drives:Mini Cooper S, Disco TDi, Escort RS Turbo,

Posted 20 March 2011 - 10:23 PM

I have recognised that project "Ambitious but rubbish" was aptly titled. Im not likely to get round to building it any time in the near couple of years, so everything is up for sale.

Collection from Kettering is welcome (in some cases its essential), and delivery may be available too.

Colour coded bump strips, need painting, £20 posted

Posted Image


GTi grille/ducting, £20 posted

Posted Image


GTi skirts, missing one front jacking point cover, £50 posted

Posted Image

Magnex stainless steel cat back system, £90 collected

Front fog lights, £20 posted

Posted Image


Escort mk5/6 fuel tank, brand new, £50 posted


Lower grille, for fogged bumper, £8 posted

Posted Image


Radiator/fan assembly, worked when car was taken off the road, no leaks, £25 posted


Suede covered unbranded 3 spoke sports steering wheel, slightly smaller than usual (300ml I think), like new, £25 posted


White clocks, 34k miles on the clock, some small marks on the plastic that want polishing off, £25 posted

Posted Image


Colour coded handle, few scratches, £5 posted

Posted Image


Alloy swirl pot, £40 posted

Posted Image


Pipercross Viper air filter, couple of scuffs on the carbon, some of the black paint has come off so could do with respraying, and the element needs a clean, £30 posted


MK6 wiper mechanism, worked when removed and stored in the dry since, £20 posted

Posted Image


GTi wiring loom, with the ecu pins changed to run a 2.0 pre pats ecu, £35 posted

White rear spoiler, needs repainting, £20 posted

Posted Image


Spax RSX mk6 coilovers, height/bump/rebound adjustment, came from Tez's mag featured car, £320 posted


Superlight fibreglass bonnet, part or minirotty's group buy, needs to be fitted with bonnet catches at the front but can have normal hinges at the back. £170 collected

Mk 6 cosworth style front wings, with vents fitted and side repeater cut out, £30 collected


Cosworth style side skirts, came from same kit as the front wings, £20 collected


Escort front upper strut brace, currently painted state blue, £50 posted


Polished steel induction pipe and silicone hose elbow, probably best used on the plastic inlet models, £30


Escort front lower strut brace, genuine Ford, £45 posted

Edited by Trig, 11 February 2012 - 09:52 AM.

Please visit & donate: Thunderball Rally for The Prostate Cancer Charity

Escort parts clearance (coilovers, lightweight body parts, everything I stockpiled for my track car)


All posts are the view of the writer, and not necessarily that of escortevolution.co.uk/ feoc.co.uk

trig@escortevolution.co.uk

#2 Trig

Trig
  • Gender:Male
  • Location:Near Kettering, Northants (Im a bloody southerner now!)
  • Drives:Mini Cooper S, Disco TDi, Escort RS Turbo,

Posted 20 March 2011 - 10:43 PM

Zetec alternator, brand new Valeo model, £50 posted

Posted Image


Front fog blanks, one broken tab, £5 posted

Posted Image


Sytec ITP044 fuel pump, upgrade over standard RS turbo pump, rough equivilant to Escort Cosworth pump, £55 posted

Posted Image


Momo Race Evo steering wheel (one for the die hard Evo'ers here), leather and alcantara with a red 'evo' marker, brand new but no box, £90 posted


MK6 steering wheel boss, £30 posted


Willans 4 point racing harness, club racing type with radial buckle ready to take crotch straps, £60 posted

Adjustable steering column, £20 posted


Roose motorsport silver silicone hose set, main coolant hoses and ancillary hoses, £195 posted


RS accessory grille, £50 posted

Posted Image


DTM mirrors with mk5/6 escort base plates, brand new, £35 posted

Posted Image


Morettes, painted black with inside lights removed and silver trumpets placed instead, comes with unpainted indicator surrounds and indicators, £220 posted

Aerocatch plus flush locking type, brand new in box, £45 delivered

Regular stainless steel bonnet pins, brand new, £15 posted

Posted Image


MK5/6 Escort cosworth style bodykit. Full rear arch type so ideal for a full Escort cosworth replica. Completely un cut, never even trial fitted. Fibreglass with a black gel coat. £280 collected

Zetec turbo engine. Rolling roaded at 181bhp @ 10psi. Uses a Focus T190 (Built by Mountune) manifold and turbo (from what I have found out) which is very similar to a T25. Appears to be using a decomp plate, I havent had the engine apart to confirm/deny this. There is an adjustable fuel regulator on the fuel rail and the efi inlet is the low output version. There is a 4 plate paddle clutch fitted to the flywheel. £500

Posted Image

Posted Image

Posted Image


GTi rear bumper, currently painted state blue, needs painting really as there are a few too many scratches, £15 collected (sorry, I didnt take a closer picture)

Posted Image


Mk6 3 door rolling shell. This started life as a 1.3, now it has been stripped of all of its sound deadening and is completely rust free. The spare wheel well has been cut out and plated over, this happened at the same time as the shell was seam welded and the interior and engine bay was painted ST orange. When I got the shell I stripped the underside of all of its paint and underseal to treat any of the hidden rust spots before it got 2 coats of Bilt Hamber Electrox zinc heavy primer before 4 coats of 1978-79 Signal Orange.

The rear beam is from a 1998 GTi, so its the thicker rear beam which is without the anti roll bar, which currently has drums fitted but will take Focus mk1 rear discs. The window mechs are winders and not electric and the doors are not showing any signs of rust. There is a front anti roll bar which currently isn't fitted to the subframe, but does come with a pair of polyurethane ARB bushes. It is currently sitting on 15 inch GTi alloys but the tyres arent much good. the front hubs are non ABS items, one has a brand new wheel bearing, the other side needs replacing (which is which currently escapes me).

This would need collecting, or could be delivered.

£600

Edited by Trig, 11 February 2012 - 09:55 AM.

Please visit & donate: Thunderball Rally for The Prostate Cancer Charity

Escort parts clearance (coilovers, lightweight body parts, everything I stockpiled for my track car)


All posts are the view of the writer, and not necessarily that of escortevolution.co.uk/ feoc.co.uk

trig@escortevolution.co.uk

#3 True Blue

True Blue
  • Gender:Male
  • Location:Brazil
  • Drives:Escort MK7 GHIA 2001/01

Posted 21 March 2011 - 12:32 AM

I sent you a PM.
Posted Image

#4 iwantacosworth

iwantacosworth
  • Gender:Male
  • Location:Glasgow Scotland
  • Drives:Astra Coupe Turbo( Vroooom Tsssch!!) :)

Posted 21 March 2011 - 02:42 PM

Pm'ed matey.

#5 mclovin9091

mclovin9091
  • Gender:Male
  • Location:Dartford or glasgow or Kinloss
  • Drives:Escort MK 6 1.6

Posted 21 March 2011 - 05:50 PM

Polished steel induction pipe and silicone hose elbow, probably best used on the plastic inlet models, £30

Posted Image


Whats the diameter of the hose? Or easier would it fit straight onto a 1.6 EFI inlet?

Cheers

#6 rodssescort

rodssescort
  • Gender:Male
  • Location:Nottingham
  • Drives:escort mk 6

Posted 21 March 2011 - 07:34 PM

What bolts would be needed to fit the lower strut brace? and do they come with the brace? Cheers

#7 Trig

Trig
  • Gender:Male
  • Location:Near Kettering, Northants (Im a bloody southerner now!)
  • Drives:Mini Cooper S, Disco TDi, Escort RS Turbo,

Posted 22 March 2011 - 01:12 PM

Polished steel induction pipe and silicone hose elbow, probably best used on the plastic inlet models, £30


Whats the diameter of the hose? Or easier would it fit straight onto a 1.6 EFI inlet?

Cheers


I cant remember off hand, one end of the elbow, the ID is the same size as the OD of the throttle body, I would have to check the other end as its smaller but I dont know by how much


What bolts would be needed to fit the lower strut brace? and do they come with the brace? Cheers


It needs M10 bolts, I dont have any for it though, I was going to buy them new. And it has now sold.


Everything that sells, I will remove the image and put a strikethough the text to signify that it is no longer available.
Please visit & donate: Thunderball Rally for The Prostate Cancer Charity

Escort parts clearance (coilovers, lightweight body parts, everything I stockpiled for my track car)


All posts are the view of the writer, and not necessarily that of escortevolution.co.uk/ feoc.co.uk

trig@escortevolution.co.uk

#8 Scort_CVH

Scort_CVH
  • Gender:Male
  • Location:West Lothian, Scotland
  • Drives:1.6 SI Escort MK6 Building: 1.6 RST Fixing: RS2k

Posted 22 March 2011 - 06:59 PM

if boss is for sale still, dibs thanks :)

#9 C6 CYA

C6 CYA
  • Gender:Male
  • Location:NOTTINGHAM
  • Drives:escort mk6

Posted 22 March 2011 - 07:04 PM

where did you get the roll over jig from trig? and replied to your pm, i have pictures somewhere of it before it was painted that shows all the seam welding ill try and dig them out

#10 JC

JC
  • Gender:Male
  • Location:Brummie land!
  • Drives:2.0 powered Silver Escort

Posted 22 March 2011 - 07:08 PM

"4 plate paddle clutch" would you be willing to split, what condition, and what flywheel is it attached to?

cheers
Posted Image

Clicky to my Escort

My ebay items for sale - Looky :-)


Got a question? feel free to use the send me a message function (a PM)

#11 mclovin9091

mclovin9091
  • Gender:Male
  • Location:Dartford or glasgow or Kinloss
  • Drives:Escort MK 6 1.6

Posted 22 March 2011 - 09:25 PM

I cant remember off hand, one end of the elbow, the ID is the same size as the OD of the throttle body, I would have to check the other end as its smaller but I dont know by how much


i'll patiently wait for a reply then, cheers.

#12 p4u1

p4u1
  • Gender:Male
  • Location:Stafford
  • Drives:1.8 escort si

Posted 25 March 2011 - 07:23 PM

Will the fuel tank fit a 1.8 zetec si

#13 Trig

Trig
  • Gender:Male
  • Location:Near Kettering, Northants (Im a bloody southerner now!)
  • Drives:Mini Cooper S, Disco TDi, Escort RS Turbo,

Posted 27 March 2011 - 11:30 AM

Will the fuel tank fit a 1.8 zetec si

Yes, it will
Please visit & donate: Thunderball Rally for The Prostate Cancer Charity

Escort parts clearance (coilovers, lightweight body parts, everything I stockpiled for my track car)


All posts are the view of the writer, and not necessarily that of escortevolution.co.uk/ feoc.co.uk

trig@escortevolution.co.uk

#14 Scort_CVH

Scort_CVH
  • Gender:Male
  • Location:West Lothian, Scotland
  • Drives:1.6 SI Escort MK6 Building: 1.6 RST Fixing: RS2k

Posted 27 March 2011 - 11:52 AM

Any news about the boss mate, cash waiting :)

#15 Trig

Trig
  • Gender:Male
  • Location:Near Kettering, Northants (Im a bloody southerner now!)
  • Drives:Mini Cooper S, Disco TDi, Escort RS Turbo,

Posted 28 March 2011 - 09:32 PM

A few more bits have been sold now, Ive removed the images and put a strikethrough the description
Please visit & donate: Thunderball Rally for The Prostate Cancer Charity

Escort parts clearance (coilovers, lightweight body parts, everything I stockpiled for my track car)


All posts are the view of the writer, and not necessarily that of escortevolution.co.uk/ feoc.co.uk

trig@escortevolution.co.uk



Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users