Jump to content


Photo

mk6 escort fusebox interior loom


6 replies to this topic

#1 bongo

bongo
  • Gender:Male
  • Location:southwales valley boy
  • Drives:2.0 si...soon to be 2.3 :-)....1.8 zetec focus as my daily....

Posted 04 October 2012 - 07:13 PM

a question for you guys,are all mk6 escort fuse box and interior looms the same?just acquired a mk6rs2k but he has ripped/cut every single piece of wire inside :nutter:

new%20sig%20Custom.jpg


#2 etrebus

etrebus
  • Gender:Male
  • Location:nr exeter devon
  • Drives:escort mk1 1.8 zetec and mark 6 2.0 zetec

Posted 04 October 2012 - 07:29 PM

a question for you guys,are all mk6 escort fuse box and interior looms the same?just acquired a mk6rs2k but he has ripped/cut every single piece of wire inside :nutter:

definatly different fuseboxes and looms :thumb:

#3 bongo

bongo
  • Gender:Male
  • Location:southwales valley boy
  • Drives:2.0 si...soon to be 2.3 :-)....1.8 zetec focus as my daily....

Posted 04 October 2012 - 07:55 PM

the fuse box is there,thought the interiors were the same though,just got a bag full of wires,dont even know why he was cutting and ripping them out.

new%20sig%20Custom.jpg


#4 etrebus

etrebus
  • Gender:Male
  • Location:nr exeter devon
  • Drives:escort mk1 1.8 zetec and mark 6 2.0 zetec

Posted 04 October 2012 - 08:10 PM

the fuse box is there,thought the interiors were the same though,just got a bag full of wires,dont even know why he was cutting and ripping them out.

no theres a few different ones depending on what electrics are fitted some one on here might be able to tell you if a higher spec fusebox will fit a lower spec car :thumb:

#5 shawdreamer

shawdreamer
  • Gender:Male
  • Location:Runcorn, Cheshire
  • Drives: 3Dr Mk5b, and the missus's head into the headboard while gaping her rear

Posted 05 October 2012 - 12:04 PM

There should be a sticker on the front of the fuse-box indicating what spec it is (LOW/MID/HIGH), RsK's are obviously fitted with HIGH spec looms and FB's and given that you say the current loom is pretty well butchered Id not take the chance and simply source a full loom and box from a scrappy, iirc you should be able to find a similar spec with the same HIGH FB and interior cab loom as a RSK in a Ghia model

some one on here might be able to tell you if a higher spec fusebox will fit a lower spec car :thumb:



It will but you'll end up with a Fusebox thats came to a grunge mud pit party dressed in a tuxedo... if you get my meaning

the fuse box is there,thought the interiors were the same though,just got a bag full of wires,dont even know why he was cutting and ripping them out.



sounds like the original owner had a heavily integrated alarm system he wanted to keep..... having fitted more than my fair share of fancy "all the bells and whistles" alarm systems I can confirm just how intrusive they can be when it comes to wiring them into an existing loom...... pulling them out afterwards can leave a factory loom looking like someone tried to perform brain surgery with a lump hammer and a brick chisel.
Posted Image
any monkey can buy and bolt on.... an individual creates
!
you have to really ask yourself something when you consider trying to insult me.. do I really seem like the type of person who gives a flying shite covered monkey F*ck about your pointless comment?.. I'll save your deminished intellect the struggle..that'd be a "No"
Anything can be made to fit.... thats what hammers are for silly!
All posts are the view of the writer and not necessarily that of..... actually no, I dont really give a flying flame toasted turd, dont read my posts if you dont like em R-tard.
no one can accuse me of being "two-faced", Ill call you a nob behind your back and to your face... the latter preferably so I can watch you uselessly blow your lid
being directly honest with your opinion may not make you well liked but it will get you appreciated by the worthwhile few with the sense to understand.... Id rather be appreciated for who I am than liked for what I'm not.

#6 ESCORTMON

ESCORTMON
  • Drives:Mk6 td van

Posted 12 August 2016 - 09:37 PM

Hi there,
Sorry to drag up an old topic but search function has only got me this far.
I have a base model fuse box in my 75 van (typical van I am lead to believe) with hacked interior loom

I have a interior loom and fuse box from a mid spec TD (believe its mid spec anyway) however I am unsure if swapping interior loom and fuse box along with additional battery lives will work with the other base spec van wiring?

Could someone please help me out on this :)

Many thanks.

#7 ESCORTMON

ESCORTMON
  • Drives:Mk6 td van

Posted 14 August 2016 - 07:51 AM

On closer investigation its a HIGH spec fusebox and interior loom.
Fitted it in the van minus airbag wiring (no idea if I need the earths on the offside a pillar for other things in the fusebox or if its just for the airbag? With airbag ecu unplugged in the old van it still works as it did so I assume I don't need them earths?)
Anyway, it doesent work, nothing works and the hazard lights turn the dash lights on and off.
Anyone able to help me out with what went wrong? Lol.



Reply to this topic



  


0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users