tomm45 Posted February 25, 2015 Share Posted February 25, 2015 Hi people looking for some advice , I'm in the middle of putting an rs mk5 lump in to a mk6 escort(Build thread coming soon) My question is about the wiring loom , and I can't seem to find a straight answer on here or anywhere on the web , Do I have to change the complete loom? Or can I just change the ecu loom , engine loom and dash loom ? Any help would be greatly appreciated thanks Link to comment Share on other sites More sharing options...
Mex Posted February 25, 2015 Share Posted February 25, 2015 Using OMEX management on my MK6 which has it's own loom, just had to splice in power, fuel pump relay and the output for the rev counter. I'd assume you'd only need to do the same with the RS loom. You might be able to just plug in the ECU straight into the existing loom and just change any plugs that may differ between the I4 and Zetec setup. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now