simonATR Posted September 16, 2007 Share Posted September 16, 2007 Ok i've fitted the factory ford remote central locking, and i've programmed the key to start the car but i can't program it to lock or unlock! Any ideas? Link to comment Share on other sites More sharing options...
meekstaaa Posted September 16, 2007 Share Posted September 16, 2007 have you followed the post at the top of this section? Link to comment Share on other sites More sharing options...
simonATR Posted September 16, 2007 Author Share Posted September 16, 2007 have you followed the post at the top of this section?Yes many times and i put new batteries in. The key doesn't flash in unison with the clock light when it's supposed to. Link to comment Share on other sites More sharing options...
Hezz Posted September 16, 2007 Share Posted September 16, 2007 tried it with the red key? Link to comment Share on other sites More sharing options...
simonATR Posted September 16, 2007 Author Share Posted September 16, 2007 tried it with the red key? Every time. Link to comment Share on other sites More sharing options...
Hezz Posted September 16, 2007 Share Posted September 16, 2007 hang on let me re-read it right-o. have you left the red key in when you turned it back to 0 ? Link to comment Share on other sites More sharing options...
simonATR Posted September 16, 2007 Author Share Posted September 16, 2007 hang on let me re-read it right-o. have you left the red key in when you turned it back to 0 ?Yeah i did. Link to comment Share on other sites More sharing options...
Hezz Posted September 16, 2007 Share Posted September 16, 2007 which bit do ya get to before it goes t1ts up? Link to comment Share on other sites More sharing options...
simonATR Posted September 16, 2007 Author Share Posted September 16, 2007 which bit do ya get to before it goes t1ts up? Put your red key in the ignition and turn to position IWhen the red light under the clock stays on turn the red key to position 0Now point your infra red key at the infra red eye on the interior lightPress and hold the unlock button (>) and press the unlock button (>>) three times in succession. I do all of the above but then the key and the light don't flash in unison (well the key doesn't flash at all, except when i press and hold it) The red light on the key and the alarm light under the clock should flash in unison.The light under the clock will then be on constant allowing you to do this all again with another key.Either wait one minute or turn the red key to position I to cancel. Any ideas? Link to comment Share on other sites More sharing options...
Hezz Posted September 16, 2007 Share Posted September 16, 2007 so the red alarm light is on under the clock and you are holding the > button, and just press the >> button 3 times whilst still pointing at the infra red eye and you did plug the lile green plug onto the light - stupid question i know, but ..... the infrared key does have a little glass eye thing on it too ...... Link to comment Share on other sites More sharing options...
simonATR Posted September 16, 2007 Author Share Posted September 16, 2007 so the red alarm light is on under the clock and you are holding the > button, and just press the >> button 3 times whilst still pointing at the infra red eye and you did plug the lile green plug onto the light - stupid question i know, but ..... the infrared key does have a little glass eye thing on it too ...... I've tried it >, >>, >, >>, >, >> and >, >>, >>, >>. Yeah its plugged in!! yeah the key has the glass eye. Link to comment Share on other sites More sharing options...
Hezz Posted September 17, 2007 Share Posted September 17, 2007 yep the >, >>, >>, >> is the right sequence fooook knows done it a couple of times to mine and it works ok will have a think Link to comment Share on other sites More sharing options...
simonATR Posted September 17, 2007 Author Share Posted September 17, 2007 Any relay need adding or changing? I've got 97' GTi fusebox (obviously with the I/R connections) Link to comment Share on other sites More sharing options...
bluliz Posted September 17, 2007 Share Posted September 17, 2007 Any relay need adding or changing? I've got 97' GTi fusebox (obviously with the I/R connections) no you just need the new control module, ir sensor, loom and an ir key Link to comment Share on other sites More sharing options...
simonATR Posted September 17, 2007 Author Share Posted September 17, 2007 Any relay need adding or changing? I've got 97' GTi fusebox (obviously with the I/R connections) no you just need the new control module, ir sensor, loom and an ir keyWell i'm proper f**king confused now! I don't know what to do now. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now