VanHeaven

I have four gti centre caps will fit 15" or 16" wheels 3 are in good condition one is slightly damaged but fit ok £25 posted http://i1107.photobucket.com/albums/h385/jonvanheaven/IMG_0457.jpg http://i1107.photobucket.com/albums/h385/jonvanheaven/IMG_0456.jpg

i have found with my bowman chassis bits easy and cheap to replace i get alot of bits from my local kart track

if you look on ebay put in heated seat kit on one of them there is a wiring diagram that you can copy

hi can we see photos please and also where you are ?

yea as above its on the front

Pity you are to far away i would of had the front bumper

You can't use keyways to advance the spark, scrutineers do check for the keyway being standard. What I'm doing is advancing the cam gear on the crankshaft, which is legal and is what RPM do as part of their tune you will have to let me know how you advance the cam gear as i think i might give it a go on my 200s before my next race

has your car got headlight adjusters fitted in the car to raise or lower the lights as i think you will also need that for hids but not 100% sure i think the car can only have them if they were standard fitment

was this in the drivers kick panel if so its for the centre locking

MSA racing is a pain i dont know if you can use 8 deg keyways if that is what you was on about advancing the timing and you know there is only a few engines you can use for msa racing i know my brother in law has a pair of RPM engines and they have flat top pistons standard for msa racing and they are really fast thought it was a bowmans chassis as it the same as mine i run twin 200s its good fun and the price is not to bad i love the colour you have painted your chassis cant wait to see it finished i might have to copy your colour and paint my chassis

ok its not like what i have a machine polisher (mop) i use g3 cutting paste but i am not sure what to use for yours think it is only for polish

is that a bowman chassis ? are you running the gx160 or gx200 engines are you going to debaffel the exhausts and if you fit the gx120 flywheel fan the engines will spin up faster and dont forget to jet the carbs

can you post a photo of what you have as i dont want to tell you to use something and find out later you have something that is no good for what i told you to get

this is easy to do there is a black cover that has lots of holes in remove that first and then unclip the clip on the front and the fuse box will hang down unclip all the wiring and also the 10mm nut (this is 12v live) so remove battery lead first the fuse box will slid out as it is on a rail

hi yes I still have it I will pm you my paypal addy thanks if you still have one please pm me and your addy and i send payment thanks