Jump to content

Escort Si-130

User
  • Posts

    160
  • Joined

  • Last visited

  • Days Won

    2
  • Feedback

    0%

Escort Si-130 last won the day on September 26 2016

Escort Si-130 had the most liked content!

Previous Fields

  • Drives
    Escort mk5b Cabriolet

Profile Information

  • Gender
    Male
  • Location
    LONDON

Escort Si-130's Achievements

Collaborator

Collaborator (7/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

2

Reputation

  1. Some Ford car radio wiring connectors & diagrams Car radio wiring connector diagram http://www.tehnomagazin.com/Auto-radio-car-connector/Car-wiring-diagram.htm FORD Car Radio Stereo Audio Wiring Diagram http://www.tehnomagazin.com/Auto-radio-car-connector/FORD-Car-Radio-Wiring-Connector.htm Quadlock Stereo Connector - Sony DAB / USB https://www.fordwiki.co.uk/index.php/Quadlock_Stereo_Connector_-_Sony_DAB_/_USB
  2. Use a host such as tinypic, or via attached my media button
  3. Try the crankshaft position sensor
  4. a blessed merry Christmas to everyone.
  5. Only adjustment is the allen key on the peddle or it would be a new clutch kit if it doesn't cure it.
  6. Doesn't make sense what you are trying to do. Are you trying to remove the engine from the car, but leaving the gearbox in place. If so, then to separate the two, needs all bolts between the two removed. Once that is done, you may need to use a screwdriver or crow bar to lever the two apart. The engine would have to either be held supported on stands or via the crane. Then the gearbox pulled away from the engine. I always think the best way of doing it is to remove the gearbox first, then remove the engine. It is worth noting you should remove the engine mount of the offside off from the engine if you plan to lift the engine from the bay rather than underneath the car.
  7. An allen key bolt in the top of the pedal. Think its either a 6mm or 8mm, cant remember of my head.
  8. Escort RS2000/GTi bodykit. Check ebay.
  9. If it is the MTX75 gearbox then no it doesn't. It has a roll pin, which could be moved up or down.
×
×
  • Create New...