Jump to content



Recommended Posts

did you have a lot of fluid in the reservoir? if you didn't then air will be in the system. make sure you over fill the reservoir when bleeding and keep it topped up during the process. and on the last bleeding don't top it up at all and use as much fluid as you need then when you done the complete system again fill to max! and the bleeding be from passenger front - driver rear - driver front - passenger rear? thats what the haynes manual says!
Link to comment
Share on other sites

how did you bleed them ??


i used this contraption it pushed flued throught the sistom its called eazi bleed


it is front right back left front left back right


That's exactly how I bleed my brakes with the Easy Bleed. As far as I can remember, that sequence is correct. So just try it a few times over and over again.


You'll get there in the end!

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Create New...