How do I drop out the fuse box to access the fuses on top of it?

one crosshead screw take that of, then there are 2 clips. Undo them and it will drop out straight in front of ya.

Cheers

no worries mate, easy enough

Errm....

undo the 6 screws that hold the lower fascia in place on the drivers side and remove for ease of access.

Then you will see a chrome overcentre catch at the top front of the fusebox.

Lift that upwards and release the catch from its top mounting slot.

The fusebox will then pivot downward to give you access to the relay panel on top of it.

Errm....

undo the 6 screws that hold the lower fascia in place on the drivers side and remove for ease of access.

Then you will see a chrome overcentre catch at the top front of the fusebox.

Lift that upwards and release the catch from its top mounting slot.

The fusebox will then pivot downward to give you access to the relay panel on top of it.

 

spot on

I thought one screw wasn't enough when I attempted to take it apart.

 

I released that catch but I didnt pop all the way down like I had hoped!

 

Any other ideas?

 

http://i307.photobucket.com/albums/nn313/tehrules/24072008232.jpg

 

The catch is locked in that photo, but when it unlocks it don't reveal any fusebox!

lift the whole fusebox up again with the catch open, its on a little lip behind the hook

u lot do things the hard way lol

lift the whole fusebox up again with the catch open, its on a little lip behind the hook

 

I'll try that next

 

u lot do things the hard way lol

 

Eh? What you on about lol?

never had to go to al that hassel to drop a fusebox before

Depends on what Mk you have?!?

ffs your an old woman

 

this is what the top looks like

 

http://www.evo-host.co.uk/getimg/13972.jpg

Wheres the "Bites tongue" emote

Lift the fuse box up slightly to get the latch at the top disengaged.

Then it will pivot downward and the top will be accesable.

Its behind that big wiring block at the top of the picture

I managed it, changed the fuse, yet still didn't recktify boot switch problems...

 

On top of that box, thats where all the cables go in... which ones are the bootswitch/solonoid related stuff?