Posted August 14, 200816 yr How big a job is it? My seats have motors to up and down. If I got GTI Seats do they just bolt onto this frame? Ta.
August 14, 200816 yr Yep should do - mine did. Not a big job at all I did mine in an hour or so. I just found it tiring cos im weak
August 14, 200816 yr The GTi driver seat should have the up/down motor too, so it should just be a case of unbolting the seat from the floor and change.
August 14, 200816 yr Ta, was just worried about keeping the functions there. Cheers! wiring should be the same so its like for like, easy job
August 14, 200816 yr motors? never knew ford were that advanced?Its not so much a motor, more of a hamster in a wheel. The rear seats use Torx bolts, T45 I think, All in all should take about an hour. The motor on the seat and the seatbelt tensioners use the same plugs so as Steve said, straight swap, un plug one, plug into other.
August 14, 200816 yr If I can do it, anyone can! On the subject of seat changing... Would seats from a Mk5 fit a Mk6?
August 15, 200816 yr On the subject of seat changing... Would seats from a Mk5 fit a Mk6? not without modification and subframes from a doner fiesta etc
August 16, 200816 yr sorry to hijack your topic bob but i have just bought some GTI seats to go into my si. What i would like to know is how easy it is to fit and how easy to wire the seats up so the motor works. thanks
August 17, 200816 yr McBob, does your passenger seat work electrically, the GTi seats only has the drivers that works like that
Create an account or sign in to comment