clutch cable removal

[senglea]

hi guys,how in gods name do you remove clutch cable/disconnected it from paw ratchet and from front end but cable will only come out about six inches,any advice would be greatly received.cheers

[The Badger]

You need to start at the gearbox end, with pliers you need to disengage the cable from the release lever/arm, don't damage the cable if it is to be re-used, then take the cable out of the locating lug.

 

Once this is done you need to go into the footwell, you should see a spring going from the pedal to the bulk head/pedal box, take this spring off and then you should just be able to remove the cable from the quadrant.

 

Then it should just be a matter of withdrawing the cable through the bulk head and into the engine bay.

 

Hope this helps

 

Regards

 

James