Jump to content

Seat recliner handwheel


binners
 Share

Recommended Posts

Hi,

 

Has anyone got a couple of seat recliner handwheels for sale of the type shown in the picture attached?

 

 

If so please let me know the cost posted to SO249EU, Hampshire, or if you know anywhere I can get a couple.

 

One of mine has broken and the other is on its way.

 

http://www.evo-host.co.uk/getimg/23210.jpg[/img][/img]

 

 

Thanks

Alan

Link to comment
Share on other sites

Hi,

 

Has anyone got a couple of seat recliner handwheels for sale of the type shown in the picture attached?

 

 

If so please let me know the cost posted to SO249EU, Hampshire, or if you know anywhere I can get a couple.

 

One of mine has broken and the other is on its way.

 

http://www.evo-host.co.uk/getimg/23210.jpg[/img][/img]

 

 

Thanks

Alan

 

 

im sure i have.ill have a look

Edited by mrmetallica
Link to comment
Share on other sites

I have got a couple

 

Do they just pull off

 

 

Hi,

 

Thanks for your reply.

 

The smaller diameter covers can be pulled out of the centre of the handwheel and then you can see if anythings holding the handwheel on the spindle.

There wasn't anything holding mine on they were just tough to pull off.

 

Hope you can supply these to me.

 

Alan

Link to comment
Share on other sites

I have got a couple

 

Do they just pull off

 

 

Hi,

 

Thanks for your reply.

 

The smaller diameter covers can be pulled out of the centre of the handwheel and then you can see if anythings holding the handwheel on the spindle.

There wasn't anything holding mine on they were just tough to pull off.

 

Hope you can supply these to me.

 

Alan

 

£5 posted for pair?

Link to comment
Share on other sites

I have got a couple

 

Do they just pull off

 

 

Hi,

 

Thanks for your reply.

 

The smaller diameter covers can be pulled out of the centre of the handwheel and then you can see if anythings holding the handwheel on the spindle.

There wasn't anything holding mine on they were just tough to pull off.

 

Hope you can supply these to me.

 

Alan

 

£5 posted for pair?

 

Cheers m8,

 

Are these exactly as shown in my photo?

The spindle hole needs to be approx 10mm between flats and 15mm in the other direction and this section needs to start about 2/3 mm from the INSIDE face of the handwheel.

Link to comment
Share on other sites

I have got a couple

 

Do they just pull off

 

 

Hi,

 

Thanks for your reply.

 

The smaller diameter covers can be pulled out of the centre of the handwheel and then you can see if anythings holding the handwheel on the spindle.

There wasn't anything holding mine on they were just tough to pull off.

 

Hope you can supply these to me.

 

Alan

 

£5 posted for pair?

 

Cheers m8,

 

Are these exactly as shown in my photo?

The spindle hole needs to be approx 10mm between flats and 15mm in the other direction and this section needs to start about 2/3 mm from the INSIDE face of the handwheel.

 

I will pull them off in the morning to check for you

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...