Jump to content

Featured Replies

Posted

Hi , Ive now done my 2.0 swap into my previously 1.6 zetec and its running perfectly engine-wise but won't go into gear at all , A new clutch was put on too and since then the pedal is very close to the floor with only about 2.5" of pedal movement , any ideas what the dealio - I've come to a halt, Someone suggested it would be the gearlinkage but I very highly doubt that.

 

Help appreciated :(

have you ajusted the clutch pedal using the ajuster at the top? might need winding out?
  • Author
Hopefully thats what it is , wheres this adjuster? on the pedal box?
very top of the clutch pedal fella, its an allen key ajustment, 6mm iirc
Didnt happen to be an LUK clutch by any chance? Same happened to mine rob, you getting a grinding noise at all?, clutch plate was shattered to ferk!
  • Author

unlucky scott

 

nah , its a borg&beck clutch , hopefully its the adjuster , ill have a look later.

unlucky scott

 

nah , its a borg&beck clutch , hopefully its the adjuster , ill have a look later.

 

should be okay then :)

the remote selector might just want adjusting if its not in the right position it wont select the gears or you will only get certain ones
will it go in gear when the car is off?

Create an account or sign in to comment