Wiring in a RS1800 zetec engine bay loom.

Hi all,

I am after a bit of help/advice on what wires I need to wire from a Fiesta RS1800 Zetec engine bay loom into my MK2 Orion.

Going into the main zetec wiring loom connector are the following coloured wires;

1 - Brown

2 - Green

3 - Brown

4 - black

5 - Red/Black

6 - Red

7 - Black

8 - Green/Black

9 - White/Brown

10 - Green/Brown

11 - Yellow/Black

12 - Brown.

Numbers 1 - 12 are the locations of each wire in the connector.

Any help or advice from anyone who has done this conversion using the Fiesta RS1800 zetec loom would help me out.

Regards,

Rob.