Posted June 17, 201014 yr This is my rear light cluster blockhttp://img.photobucket.com/albums/v150/zetec_orion/Car/P100616001.jpg Now the question i have is that i want to relace the standard rear lights with a set of quad lights. I tried this today and the wiring just looked a mess trying to get spade connectors into the holes as i really dont want to have to chop the block off. So is there another block prewired i can get to connect into this block? Also when i had the quad lights on the fog light came on as a brake light. Do i take it that i need some sort of diode to stop this happening? if so which one?
June 17, 201014 yr you have to pull that red bit out. then get a small precision screwdriver in and push back a little tab on the spade connector then it should slide out. Its tricky and frustrating but possible
June 19, 201014 yr Author you have to pull that red bit out. then get a small precision screwdriver in and push back a little tab on the spade connector then it should slide out. Its tricky and frustrating but possible cheerz mate
Create an account or sign in to comment