davies1644 Posted July 23, 2010 Share Posted July 23, 2010 right looking at fitting the white dials out of a puma or car such as this, with a rev counter in it is the wiring going to be already their? as i already have a digital mileage in mine, so what i am asking is will it have wiring their already done for the rev counter?? and is their a set of clocks with a rev counter in suitable for a diesel van?? Link to comment Share on other sites More sharing options...
mrmetallica Posted July 23, 2010 Share Posted July 23, 2010 right looking at fitting the white dials out of a puma or car such as this, with a rev counter in it is the wiring going to be already their? as i already have a digital mileage in mine, so what i am asking is will it have wiring their already done for the rev counter?? and is their a set of clocks with a rev counter in suitable for a diesel van?? black or white ? Link to comment Share on other sites More sharing options...
davies1644 Posted July 23, 2010 Author Share Posted July 23, 2010 would prefer white but if not i will happily have a black 1 Link to comment Share on other sites More sharing options...
trickydicky Posted July 23, 2010 Share Posted July 23, 2010 Should work black or white. My X reg TD had no problems swapping black digital clocks with no rev counter to white clocks with a rev counter.Everything worked fine. Link to comment Share on other sites More sharing options...
heavyrightfoot Posted July 23, 2010 Share Posted July 23, 2010 I have got some black digi clocks out of a petrol Escort if they are any good to you Link to comment Share on other sites More sharing options...
mrmetallica Posted July 23, 2010 Share Posted July 23, 2010 Should work black or white. My X reg TD had no problems swapping black digital clocks with no rev counter to white clocks with a rev counter.Everything worked fine. was going to offer black ones Link to comment Share on other sites More sharing options...
danj8608 Posted July 23, 2010 Share Posted July 23, 2010 I have a W reg escort van 1.8 n/a diesel, it came with black digi dials with no rev counter, so i bought some white digi's with a rev counter, plugged them in and the rev counter dont work. Now when the battery on my van is dying the clocks do a sweep around the dials and the rev counter does a sweep also so i know they work just i dont think there is a feed for it to work normally. Link to comment Share on other sites More sharing options...
davies1644 Posted July 23, 2010 Author Share Posted July 23, 2010 yeah youll just need a signal wire from somewhere like the end of the coil if i remember rightly or probably got that totally wrong lol Link to comment Share on other sites More sharing options...
shawdreamer Posted July 23, 2010 Share Posted July 23, 2010 (edited) yeah youll just need a signal wire from somewhere like the end of the coil if i remember rightly or probably got that totally wrong lol pull out the clocks, check for a green wire running to pin.10 on the plug if not present then you dont have a signal wire, in that case run one from pin.10 to the coil, simples Edited July 23, 2010 by shawdreamer Link to comment Share on other sites More sharing options...
davies1644 Posted July 23, 2010 Author Share Posted July 23, 2010 yeah youll just need a signal wire from somewhere like the end of the coil if i remember rightly or probably got that totally wrong lol pull out the clocks, check for a green wire running to pin.10 on the plug if not present then you dont have a signal wire, in that case run one from pin.10 to the coil, simples im impressed i was right haha Link to comment Share on other sites More sharing options...
danj8608 Posted July 23, 2010 Share Posted July 23, 2010 may sound daft but coil on a diesel Link to comment Share on other sites More sharing options...
joe3666 Posted August 6, 2010 Share Posted August 6, 2010 may sound daft but coil on a dieseli have the same problem escort 18 n/a diesel fitted white dials no revcounter action but as it is a diesel no coil! any one help please? Link to comment Share on other sites More sharing options...
joe on a mish Posted February 7, 2014 Share Posted February 7, 2014 (edited) ?? Edited February 7, 2014 by joe on a mish Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now