Jump to content

pic of wheel being painted refurbed


Andyb0127
 Share

Recommended Posts

i did this wheel yesterday at work and took a few pics to show u how its done..

 

http://s760.photobuc...nt=a14537f9.jpg

http://s760.photobuc...nt=6ade1ce8.jpg

http://s760.photobuc...nt=105de6ef.jpg

 

above pics are wheel prepped ready for painting it has been sanded with an orbital sander starting with p180 then p320 and red scotched to key it up ready for painting..

 

http://s760.photobuc...nt=4b097d0e.jpg

 

here it has had one coat of wet on wet primer flash off 15mins then flatted if needed to remove any marks imperfections

 

http://s760.photobuc...nt=560edeca.jpg

http://s760.photobuc...nt=02245a2d.jpg

 

two coats of base colour applied dried for 20 mins then drop coat apllied makin silver base sits even

 

http://s760.photobuc...nt=91621bc0.jpg

http://s760.photobuc...nt=1d27e372.jpg

http://s760.photobuc...nt=764145ff.jpg

 

one coat of hs racing clear applied baked for 20 mins then demasked and fitted back to car

 

http://s760.photobuc...nt=0b07c516.jpg

http://s760.photobuc...nt=6c324d85.jpg

 

above is sprayguns used one is a devilbiss gti for wet on wet and base colur the other is a sata jet rp purely made for clear coat

 

if you have any questions please just ask me and i willdo my best to help

Link to comment
Share on other sites

I told you only the other day and moved your topic to the correct section.

You could of simply used that one rather than starting a fresh topic again in the wrong section.

Might be also an idea to read up about putting pics in your posts here. click

The reason being if others like me cant be arsed clicking on all those links its hard to see your hard work all in one neat place.

Moved for you (again). :rolleyes:

Edited by PeeWee
Link to comment
Share on other sites

Will try putting pics up that way next time but can't see what difference it makes if you are interested in looking at the the pics would click on the links shows your not that interested in subject other wise,also I did try get the topic on how to this morn and it didn't work that's why I did it again in general!!!!!!!!
Link to comment
Share on other sites

Will try putting pics up that way next time but can't see what difference it makes if you are interested in looking at the the pics would click on the links shows your not that interested in subject other wise,also I did try get the topic on how to this morn and it didn't work that's why I did it again in general!!!!!!!!

 

 

Well I am interested but i clicked on the links and it says the address is not valid.

Link to comment
Share on other sites

Will try putting pics up that way next time but can't see what difference it makes if you are interested in looking at the the pics would click on the links shows your not that interested in subject other wise,also I did try get the topic on how to this morn and it didn't work that's why I did it again in general!!!!!!!!

 

 

Well I am interested but i clicked on the links and it says the address is not valid.

They should be valid I checked them before I put topic up and it worked just my luck it don't work .......

 

iirc it has to be approved by a mod if put into the how too section. hence why it didt show up.

I see didn't know that does that mean once they approved it then it will show up...

Link to comment
Share on other sites

Will try putting pics up that way next time but can't see what difference it makes if you are interested in looking at the the pics would click on the links shows your not that interested in subject other wise,also I did try get the topic on how to this morn and it didn't work that's why I did it again in general!!!!!!!!

 

Look!

There is a section we are now in called the "Alloys" section , this is where I said put it.

Firstly, yes I am interested in the subject.

Secondly I would like to compare the images on one page so I can see them all properly (is it so hard for you to at least make a little effort to save clicking and opening multiple pages)?

Thirdly the bloody images dont work when clicked on anyway.

Fourthly, the images do work in the howto section and go to your photobucket album, it needs the images properly for me to want to approve it in that section (it can only be seen by staff at the moment until its allowed by us).

Edited by PeeWee
Link to comment
Share on other sites

Hi Andy,

 

Thanks for your contribution, Your how-to guide is live, I spent a few minutes fixing up your pictures for you.

 

http://www.escortevolution.co.uk/forums/in...howtopic=138535

 

Thanks

Stuart

 

I see didn't know that does that mean once they approved it then it will show up...

When you submit anything to that section, the page tells you that a moderator will need to approve it before it shows up :thumb:

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.
 Share

×
×
  • Create New...