Jump to content

Escort Mk6 Parts Leftover from Si


Recommended Posts

17" Beta Alloys, came off my ERST, in black, slight scuffs of the paint on rims, not kerb marks, LOADS of tread left on tyres. £120 or swap with some ERST Turbine alloys Would need to be collected or courier arranged.






Zetec wiring loom, came from a 3dr Si, ideal for Zetec conversions. £50 posted




Honeycombe grill, Ford badge has started to bubble, hence price £10 posted




Standard Rear shocks, excellent condition and were hardly used. £20




Parcel Shelf, uncut and in fantastic condition £30 posted




Radiator, again in really good condition, comes with fans and housing (could do with a paint) £40




Standard black drivers side mirror, manual £10 posted




Rover Inlet (Injection type) with injectors and wiring £40 posted




Zetec Rocker Covers, early type with 'DOHC 16V' on top £15 posted each




White Dials, showing 15,503 miles £20 posted




Puma/Fiesta Digital Dials, didnt use them so unsure of mileage £30 posted




Mondeo CD controls, used with standard Ford stereo's such as RSD6000 etc £5 posted




Electric sunroof motor, switch and cowling, worked perfect for tilt and slide, nice upgrade £20 posted




Ghia Maplights £5 posted




Half tinted rear lights, unfortunately cant find the other boot reflector £15 posted





I also have a Rover inlet (Turbo Variant) with wiring, injectors and T/B, forgot to take pictures, but if intersted £55 posted


Got more stuff to come, having a major clearout of stuff left in my garage.


Open to offers on most prices, items that dont say 'posted' will need either collected or a courier arranged.


Located near Saint Andrews, Fife, Scotland.


Thanks for looking, Ryan

Link to comment
Share on other sites

interested in sun roof bits , is that every thing to convert it over and will work staight away ? is any wiring need be done to fit it?


It is the whole unit, you unbolt your original handle and then remove the plastic trim that is attached to the roof. The motor has three securing bolts that attach to the sunroof tray. You will need to wire in a 12v feed for the motor, you can see I have crimped bullet terminals so it could removed without pulling the whole wiring out. I ran my feed down behind the A-pillar trim and into the fusebox. Basically you could use 'piggy back' connectors onto anything 12v with a fuse ideally.


Hope this helps? If not I can help you out more.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Create New...