danj8608 Posted December 1, 2010 Share Posted December 1, 2010 Anybody in Merseyside or surrounding areas capable of grafting a saff floorpan into a escort ? Pm me if you wish Link to comment Share on other sites More sharing options...
Stu Posted December 1, 2010 Share Posted December 1, 2010 I can't help with your question, but i'm curious as to why you want a sierra setup? Link to comment Share on other sites More sharing options...
danj8608 Posted December 1, 2010 Author Share Posted December 1, 2010 1 option is full custom set up or 2 do what ford did and fit a sierra floor pan into the escort, further to that the amount of mk3-4s on passion ford that follow the same route is another reason for thinking. Link to comment Share on other sites More sharing options...
Stu Posted December 1, 2010 Share Posted December 1, 2010 The geometry of the standard sierra stuff is pretty poor, that's why I was asking. Anyone seeking decent handling on a cossie goes for a modified rear beam, like an ahmed bayjoo one. Link to comment Share on other sites More sharing options...
stoo2000 Posted December 1, 2010 Share Posted December 1, 2010 The geometry of the standard sierra stuff is pretty poor, that's why I was asking. Anyone seeking decent handling on a cossie goes for a modified rear beam, like an ahmed bayjoo one.Depends if the guy is watching his pennies, it's quite an expensive conversion if you are doing it properly. Link to comment Share on other sites More sharing options...
Stu Posted December 1, 2010 Share Posted December 1, 2010 The geometry of the standard sierra stuff is pretty poor, that's why I was asking. Anyone seeking decent handling on a cossie goes for a modified rear beam, like an ahmed bayjoo one.Depends if the guy is watching his pennies, it's quite an expensive conversion if you are doing it properly. Exactly my point. Why spend all that money for crap geometry? May as well put something decent on it! Link to comment Share on other sites More sharing options...
bronze4door Posted December 1, 2010 Share Posted December 1, 2010 go to GS escorts in widness and have a look at the red mk6 shell that has been converted to rear wheel drive already and i bet if you have enough money Graham will sell it to you Link to comment Share on other sites More sharing options...
escort4x4 Posted December 1, 2010 Share Posted December 1, 2010 A fella on the rs owners club converts focus's to rwd cossie set up using saff floor pans, and he charges 3-4k for the prep work only. So if you have deep enough pockets go for it Link to comment Share on other sites More sharing options...
danj8608 Posted December 1, 2010 Author Share Posted December 1, 2010 go to GS escorts in widness and have a look at the red mk6 shell that has been converted to rear wheel drive already and i bet if you have enough money Graham will sell it to you I have seen the red escort, it sports a full cage rwd and a cossie v6 engine last time i saw it Link to comment Share on other sites More sharing options...
Apnea Posted December 1, 2010 Share Posted December 1, 2010 go to GS escorts in widness and have a look at the red mk6 shell that has been converted to rear wheel drive already and i bet if you have enough money Graham will sell it to you I have seen the red escort, it sports a full cage rwd and a cossie v6 engine last time i saw it Link to comment Share on other sites More sharing options...
tezmanian devil Posted December 1, 2010 Share Posted December 1, 2010 The guy that bought voodoos old cossie rep shell converted it to rwd using a sierra floor pan, have a look of PF resto forum for 'fwd to rwd conversion' or something like that, he might might be willing to do it for ya? Do a decent job with his! Link to comment Share on other sites More sharing options...
mexico_16v Posted December 1, 2010 Share Posted December 1, 2010 The guy that bought voodoos old cossie rep shell converted it to rwd using a sierra floor pan, have a look of PF resto forum for 'fwd to rwd conversion' or something like that, he might might be willing to do it for ya? Do a decent job with his!Link? Link to comment Share on other sites More sharing options...
onehotminute_191 Posted December 1, 2010 Share Posted December 1, 2010 You could always look out for an rs2000 4x4 shell and use that. Just convert the engine to rwd mounted and link to the existing prop or something. That way the rear end is sorted. Just need to make room for the gearbox. Link to comment Share on other sites More sharing options...
danj8608 Posted December 2, 2010 Author Share Posted December 2, 2010 The guy that bought voodoos old cossie rep shell converted it to rwd using a sierra floor pan, have a look of PF resto forum for 'fwd to rwd conversion' or something like that, he might might be willing to do it for ya? Do a decent job with his! I've read that thread on PF as many other rwd conversion threads they have on there, Link to comment Share on other sites More sharing options...
Craig855S Posted December 2, 2010 Share Posted December 2, 2010 go to GS escorts in widness and have a look at the red mk6 shell that has been converted to rear wheel drive already and i bet if you have enough money Graham will sell it to you I have seen the red escort, it sports a full cage rwd and a cossie v6 engine last time i saw it you sound surprised? As if you disbelieve there was such an engine...? Mondeo STs run cosworth built V6 engines, as do the Granada scorpios. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now