Jump to content

2.1 Zetec pistons and rods


E.S.C.O.R.T
 Share

Recommended Posts

For sale are a set of Ford steel rods from a ST170 with 86.25mm Omega forged pistons and rings. I've decided against going 2.1 now due to funds and the fact I've not even done1000 miles since the last rebuild :blub:

 

All that's needed for them is a set of 9mm blacktop ARP bolts, although I'd recommend brand new rings which are £25 for a set from Omega.

 

The pistons are designed as high compression items but will give varying C/R dependant on the gasket, how much the head and block have been skimmed etc but in a standard engine they will give the standard compression ratio. Also remember that the blacktop head has larger combustion chambers that the silvertop. As an example in a silvertop with a 1mm gasket and 0.5mm skim on the head and block will give 12.6:1.

 

Each piston is 100g lighter than the standard zetec piston.

 

They have been crack tested and checked for roundness by the tool room where I work.

 

http://i5.photobucket.com/albums/y183/b1in9b1in9/car%20bits%20for%20sale/IMAG0133.jpg

 

http://i5.photobucket.com/albums/y183/b1in9b1in9/car%20bits%20for%20sale/IMAG0136.jpg

 

£300 posted

 

Located in Llandudno, North Wales

Link to comment
Share on other sites

  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...