Jump to content

1.4 CVH - Clutch


artuan00

Recommended Posts

http://img220.imageshack.us/img220/5899/img00080201105022057.jpg

how its meant to be

 

http://img820.imageshack.us/img820/9068/img00081201105022057.jpg

Here you can see which piece has snapped

 

http://img4.imageshack.us/img4/1750/img00082201105022057.jpg

the roll pin on the snapped piece

 

[http://img833.imageshack.us/img833/3626/img00083201105022057.jpg

and i believe this is where there is also meant to be another pin?

 

This is probably what caused the clutch to go? pulling the bearing at a funny angle?

Link to comment
Share on other sites

http://img220.imageshack.us/img220/5899/img00080201105022057.jpg

how its meant to be

 

http://img820.imageshack.us/img820/9068/img00081201105022057.jpg

Here you can see which piece has snapped

 

http://img4.imageshack.us/img4/1750/img00082201105022057.jpg

the roll pin on the snapped piece

 

[http://img833.imageshack.us/img833/3626/img00083201105022057.jpg

and i believe this is where there is also meant to be another pin?

 

This is probably what caused the clutch to go? pulling the bearing at a funny angle?

you should be able to get one of them easy at scrappers. pretty sure they are all the same fork on all smaller engined escorts yes there should be 2 pins :thumb:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...