scottybo Posted May 26, 2014 Share Posted May 26, 2014 Could someone provide me with the pin out diagram for a 1.8 130 AQUA ecu and the same for a 1.6 90 ONIS ecu cheers guys Link to comment Share on other sites More sharing options...
scottybo Posted May 27, 2014 Author Share Posted May 27, 2014 must be some info on this somewhere? Link to comment Share on other sites More sharing options...
scottybo Posted May 28, 2014 Author Share Posted May 28, 2014 come one dudes! Link to comment Share on other sites More sharing options...
scottybo Posted May 29, 2014 Author Share Posted May 29, 2014 literally any information whatsoever would be appreciated Link to comment Share on other sites More sharing options...
lee grout Posted May 29, 2014 Share Posted May 29, 2014 Why not pop the same question on passionford? Link to comment Share on other sites More sharing options...
Stu Posted June 1, 2014 Share Posted June 1, 2014 Most of the info is on here, people are just too lazy to search for it. Link to comment Share on other sites More sharing options...
scottybo Posted June 5, 2014 Author Share Posted June 5, 2014 Why not pop the same question on passionford?its not a focus rs so no one will care lolMost of the info is on here, people are just too lazy to search for it.ive searched. Cant seem to find any threads on people fitti g a 130 engine. For obvious reasons everyone goes for 2l Link to comment Share on other sites More sharing options...
scottybo Posted June 9, 2014 Author Share Posted June 9, 2014 come oooooooon Link to comment Share on other sites More sharing options...
sidrick Posted June 10, 2014 Share Posted June 10, 2014 I'm installing AutoData now to shut you the fcuk up. Link to comment Share on other sites More sharing options...
scottybo Posted June 10, 2014 Author Share Posted June 10, 2014 have i upset you sidrick? Link to comment Share on other sites More sharing options...
sidrick Posted June 10, 2014 Share Posted June 10, 2014 (edited) Yes. It's rubbish forumming. You want to PM me your e-mail and I'll fire through some PDFs? Edited June 10, 2014 by sidrick Link to comment Share on other sites More sharing options...
scottybo Posted June 10, 2014 Author Share Posted June 10, 2014 Yes. It's rubbish forumming. You want to PM me your e-mail and I'll fire through some PDFs? oh you are a good boy! pm'd! Link to comment Share on other sites More sharing options...
Stu Posted June 12, 2014 Share Posted June 12, 2014 I've found autodata not 100% accurate for eec-iv pinouts, so use with caution! Link to comment Share on other sites More sharing options...
Georgio Posted June 12, 2014 Share Posted June 12, 2014 Yes, I second that, although not on all models... although regarding power and grounds most of the times is correct, it may have some differences regarding the wiring on sensors. So have a look and always measure with a multimeter before chopping and connecting again... Link to comment Share on other sites More sharing options...
scottybo Posted June 12, 2014 Author Share Posted June 12, 2014 I've found autodata not 100% accurate for eec-iv pinouts, so use with caution! sidrick sent me the pin outs, although i did notice the pictures look very different, one of the ecu's appears to have double the amount of pins, but physically they are identical Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now