STEPHEN Posted June 20, 2004 Share Posted June 20, 2004 ok i am going to colour code the black bit in the boot (the bit with the ford badge) how do i go about doing this. can some1 give me a step by step guide as i have never coded anything myself so dont know were really to start. what do i need. cheers Link to comment Share on other sites More sharing options...
BIG RY Posted June 20, 2004 Share Posted June 20, 2004 paint! Link to comment Share on other sites More sharing options...
Welshboy Posted June 20, 2004 Share Posted June 20, 2004 Im doing mine at the end of the week hopefully. This is what you should need to do. Use a medium/fine sand paper and sand it down to remove the roughness of it. Then use a fine/very fine paper and do the same and it should be smooth as a babys bum. Then give it a light coat of primer and allow to dry. Once dry, give it another. then flat it back with a a very fine paper and give it another coat with primer. then 2 coats of paint, flat back again, then a third coat of paint. Then 2 - 3 coats of laquer. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now