STEPHEN Posted June 21, 2004 Share Posted June 21, 2004 ok i have fitted neons in the footwells on my car and at the min the end is just one that fits into the ciggy lighter but i want to wire it in to a switch how do i go about doing this. what sort of wire do i need, where do i get the power supply from(some people tell me from the ciggy lighter). can some1 please tell me step by step or even direct me to website showing me cheers. also how do u remove the asytray below the cd player Link to comment Share on other sites More sharing options...
Lambo Posted June 21, 2004 Share Posted June 21, 2004 Ok, if your going to cut off the cigarette lighter adaptor then first check if its got a glass fuse or resistor inline, just to be on the safe side. Next take a scotch lock onto the back of the ciggy lighter live, and connet this to the live from for your switch, tis a very good idea to put a fuuse in line now, to save burning your car down. Connect the live for your neons to the switched side of your switch, and earth the switch if you have one with a light on it. Finally earth the neon and you now have neons working from a switch Link to comment Share on other sites More sharing options...
ryancollins Posted June 21, 2004 Share Posted June 21, 2004 or it sounds tacky but its quuite good, maxpower do a 4way switch just connect that to battery hide it under dash and gor a little 4button pad on it stick that where u want and connect neons upto there, i think it works better than ciggy lighter cus mine kept blowin the fuse Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now