I noticed a few probs my washer jets only one nozzle works on each one i knew i should of put neon jets on lol, my back wheels making a slite whinning noise i can only hear it with my stero off, do u reckon it rubbing as i tighten the bolts again, surely not bearing again that mean they would of only lasted 5 months

I've got loads of little things that need doing

 

The wiring for my wing mirror indicators needs running through the sleeve that carries the rest of the wires into the door.

While the door cards of I need to put my speaker adaptors in and refit the mirror base plate as one of the screws has ripped the thread out and so its coming loose.

Stick my sponsor graphics on the skirts.

Cable tie my brake hoses to the shocks cos they are rubbing inside the wheels on full lock.

Fit my alloy look handbrake cover.

Sort out the door locks, cos even though its delocked theres still something hanging in the door and it rattles everytime I shut the it

 

.........well you get the idea

sure its not just frozen??? mine were tonight, only one of the four worked!!!

I've got loads of little things that need doing

 

The wiring for my wing mirror indicators needs running through the sleeve that carries the rest of the wires into the door.

pete these aren't sleves!!! twist the conector nearist the a pillar it will undo i think there is a few spare prongs for u to use.

Pete these aren't sleeves!!! twist the connector nearist the a pillar it will undo i think there is a few spare prongs for u to use.

 

'Prongs' Does that mean there's already wires running through them and I just need to connect the wires at each end Or will there be an empty one to feed the wiring through

Its a multiplug type connecter pete, it has the wires running through it already

So I need to feed the wire into the fixed end, inside the door shut

yeh its a multiplug mate, take one end off, youll see (it just turns and comes off)

So to put a new feed through it I need to connect the wing end of the indicator wire to the multiplug in the door shut, then run another wire from the connector in the door to my mirrors, and just screwing the connector back on will join them Sorry but I'm Shite at this electric stuff

summit like that

Well my current problems are not to bad actually...........

 

Dodgy Wiper Pump motor - Will NOT pump out water qucikly for some reason, i've drained it, checked for blockages, but it won't pump out the back, and it just about works at the front, so new pump it is then!

 

Broken Bulb in the brake light - Can't be arsed doing it, far to cold out there tonight to do it. Got the bulb in the glove box, proabley do it tomorrow out side of tec.

 

and finally...............

 

Needed Wiper blade for the rear - Yea, im so lazy, I finally got a rear wiper blade after not having one for about 2 weeks.......... So I replaced the lot All 3!!!!!!

 

The car was also minging for a while, but today i decided it was "VALET TIME!!!!!!!!!!!!!!!" SO ITS A LOT CLEANER THAN IT WAS

 

So not to bad really...............