Jump to content

fitting electric mirrors


escortsrule

Recommended Posts

HI i need a step by step help on how to fit electric mirrors to my escort

 

when i changed the bump strips and door handles for colour coded ones i didn,t see any wires by the mirrors

does this mean i cant use them?

 

if you can help be most greatful in telling me what wires i need and what to do

 

:cheers: thanks people :cheers:

Link to comment
Share on other sites

Hi, have you first checked that you have the looms already installed? on some escorts (pretty much anything other than the basic models) the have the plug in the door just below the mirror and all you have to do is put the mirrors in and plug the plugs in :) If not then i'm not sure and someone might be able to help
Link to comment
Share on other sites

To sound like a parrot, you have to remove the door card then remove the foam sheet behind that, just under the mirror, just below where the speaker hole is you should see a large black plug that has around 6 wires going to it, it is pinned to the door but dont pull it off as leccy mirrors have a cable that is long enough to reach so you plug it in well away from the risk of water. Its just a case of remove the one phillips screw holding the black plastic trim of on the inside of the mirror then while holding the mirror on the outside undo the three bolts on the inside and then change it over. easy peasy. Plus there heated if you have heated screen.
Link to comment
Share on other sites

if you don't have them lt me know i might be able to get them out of a car i'm breaking at the moment. I'm pretty sure they'll be there in the gti i have them in mine. but check, it only takes 5 mins to whip off the door car, 6 or 7 screws around the edges, 1 in the handle, 1 in the catch and one in the bottom corner.
Link to comment
Share on other sites

To sound like a parrot, you have to remove the door card then remove the foam sheet behind that, just under the mirror, just below where the speaker hole is you should see a large black plug that has around 6 wires going to it, it is pinned to the door but dont pull it off as leccy mirrors have a cable that is long enough to reach so you plug it in well away from the risk of water. Its just a case of remove the one phillips screw holding the black plastic trim of on the inside of the mirror then while holding the mirror on the outside undo the three bolts on the inside and then change it over. easy peasy. Plus there heated if you have heated screen.

 

 

i found the black plug you was on about but something was already plugged in to it. any ideas

:unsure:

 

if you don't have them lt me know i might be able to get them out of a car i'm breaking at the moment. I'm pretty sure they'll be there in the gti i have them in mine. but check, it only takes 5 mins to whip off the door car, 6 or 7 screws around the edges, 1 in the handle, 1 in the catch and one in the bottom corner.

 

 

i think i need them leads for the mirrors.

 

can you also tell me how to fit them many thanks

 

:pancake:

Edited by escortsrule
Link to comment
Share on other sites

i found the black plug you was on about but something was already plugged in to it. any ideas

:unsure:

 

Most likely if its got something plugged into its not for the mirrors! This diagram (ford!) may help:

 

4151.jpg

 

What year is the finesse? as the later ones differed alot!

 

 

its a 's' reg 1998

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...