Hi can anyone tell me how to get the needles off my speedo dials...

 

 

gta go to work so asap!!!!

 

 

thanks

Why do you need to do this, it only breaks the dials.

Why do you need to do this, it only breaks the dials.

 

Because im changing the dials, is there another way of fitting them???

Yes there is. do a search using the search option at the top. im sure this has been covered before. and to be honest, if your going to work soon I would leave it till later as it takes a while.

do not take the needles of.if changing for clock templates make sure hole is big enough to feed over the needles.

Hi can anyone tell me how to get the needles off my speedo dials...

 

 

gta go to work so asap!!!!

 

 

thanks

2 teaspoons, one either side of the centre and lever upwards

yeah, just pull, but be very carefull they are very fragile!

yeah just pull them, however, if this is the route you chose... good luck re-calibrating the speedo and petrol, lol.

 

when i did mine (my old escort), i had to use my satnav to calibrate the speedo (whilest driving) which was lets say, fun!

 

and for the petrol, just fill the tank then just put the needle on full mark.

Edited December 8, 200717 yr by karl

yeah, just pull, but be very carefull they are very fragile!

Do they not alway's read right when there back on?

 

yeah just pull them, however, if this is the route you chose... good luck re-calibrating the speedo and petrol, lol.

 

when i did mine (my old escort), i had to use my satnav to calibrate the speedo (whilest driving) which was lets say, fun!

 

and for the petrol, just fill the tank then just put the needle on full mark.

Sorry

Thanks guys i used the teaspoons idea!!!!

 

but everything is wrong..lol...speedo and petrol and temp gauge....oh dear

 

dno how im gna fix it!!!

may aswell get new dials now

as above , what dial kit did you buy to have to take your needles off ?

I didnt buy a dial kit....i just printed them out!!!

in that case you had no real reason to take your needles out , you can slip them over with the hole ... or as lockwoods come you can slide them over , time to get some new dials

i took my needles off when i changed my diles an they work fine now as they did b4 a took them off