pornking69 Posted March 16, 2009 Share Posted March 16, 2009 how easy is it to remove a front wing and attach to another Mk6? Cheers Link to comment Share on other sites More sharing options...
mykez69 Posted March 16, 2009 Share Posted March 16, 2009 they are spot welded on, so if you can weld very easy to fit lol Link to comment Share on other sites More sharing options...
lairdie Posted March 17, 2009 Share Posted March 17, 2009 they are spot welded on, so if you can weld very easy to fit lolremove the splashgaurd and remove the bumper, clean the bottom edge on the sill and drill out the spot weldslook under the wing at the door pillar and you will see two 10mm bolts you may need to clean the sealer off first,remove them. just below the bumper where it meets the wing are more welds drill them prise the wing away if you drill themproperly it will come away easily, if not it could get messy. drill the rest along the top the last one next to the hingeis a bit tight with the bonnet in place, if you cant get it take the bonnet off. second hand wings on my van, but i am a panelbeater.advice is free any more questions ask. Link to comment Share on other sites More sharing options...
mykez69 Posted March 17, 2009 Share Posted March 17, 2009 awesome! i know how to do it properly now lol cheers, i only know so much lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now