p4u1 Posted October 21, 2011 Share Posted October 21, 2011 Got my 4 point harnesses today how's everyone fitted there's I've got 4 plates to weld into the car for the rear just wondered how have you fitted yours pics would be great thanks Link to comment Share on other sites More sharing options...
massivewangers Posted October 22, 2011 Share Posted October 22, 2011 A lot of people use the original seat belt mounting point for the outer lap belt. I'd then fit another one to the exhaust tunnel for the other side myself (make sure there's a proper strengthening plate welded into the floor). At the rear, it depends on what sort of belts you have. Some use eyebolts and the like, some are designed to wrap around a strut brace or roll cage. Just make sure that they're at as shallow an angle as possible! Link to comment Share on other sites More sharing options...
p4u1 Posted October 22, 2011 Author Share Posted October 22, 2011 Yeah I've bolted one in the original hole by the door removing the rail and the rears are being bolted to the floor roughly were the rears were bolted but fia plate are being welded in might have to order two more and weld to the tunnel for the inner lap not keen on bolting it between the floor and seat rail Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now