Bertrum Posted April 3, 2012 Share Posted April 3, 2012 Has anyone got a wiring diagram for a mk6 escort ecu as i have a 2.0 non patts and know a lot of people put it in the mk 6 so if anyone has a relivent diagram i would be very thankful if u could post or provide a link as i have searched the site and come up with nothing, cheers tom Link to comment Share on other sites More sharing options...
sidrick Posted April 3, 2012 Share Posted April 3, 2012 Took 2 minutes on google, mate: http://i126.photobucket.com/albums/p89/adolftitler/ecu1.png http://i126.photobucket.com/albums/p89/adolftitler/ecu2.png Link to comment Share on other sites More sharing options...
Bertrum Posted April 3, 2012 Author Share Posted April 3, 2012 Took 2 minutes on google, mate: http://i126.photobucket.com/albums/p89/adolftitler/ecu1.png http://i126.photobucket.com/albums/p89/adolftitler/ecu2.png[/. I ve found this before but as i basically have a orange and blue wire not attached to ecu and trying to work out what its for. As none off these diagrams even have a orange and blue wire im pretty stumped what to do and weather to just start again with another loom and rite ecu Link to comment Share on other sites More sharing options...
sidrick Posted April 3, 2012 Share Posted April 3, 2012 I think the issue you are having is that the loom you are using is not from the same car as the ECU, am I right? Can you not trace the orange/blue wire that is loose to the multiplug connector at the other end? Link to comment Share on other sites More sharing options...
Bertrum Posted April 3, 2012 Author Share Posted April 3, 2012 I think the issue you are having is that the loom you are using is not from the same car as the ECU, am I right? Can you not trace the orange/blue wire that is loose to the multiplug connector at the other end?Im not sure what the loom came from but yeah looks like i will just have to trace the wire from the ecu this is what a mate has figured out so far, by the way its a DESK ecu. http://i1078.photobucket.com/albums/w494/Tom_Harding/e7bd1fda.jpg Link to comment Share on other sites More sharing options...
sidrick Posted April 3, 2012 Share Posted April 3, 2012 I think you're going to be chasing your tail without the right loom and ECU. IMO, you're pissing in the wind trying to look at wiring diagrams if you don't know for sure what the loom is out of. A 1.8 loom and ECU will cost fcuk all from a scrap yard and most likely save you hours of head scratching. Link to comment Share on other sites More sharing options...
Bertrum Posted April 3, 2012 Author Share Posted April 3, 2012 I think you're going to be chasing your tail without the right loom and ECU. IMO, you're pissing in the wind trying to look at wiring diagrams if you don't know for sure what the loom is out of. A 1.8 loom and ECU will cost fcuk all from a scrap yard and most likely save you hours of head scratching.Well might have to do that as i have really bad head ache from this. I cant find out what loom it is as the kiddy i got it off didnt do the conversion so he dnt know. I got a haynes on way for escort and orion from 1990 to 2000. Will i not be able to figure out what loom i have from this? Link to comment Share on other sites More sharing options...
Stu Posted April 3, 2012 Share Posted April 3, 2012 For your information, a loom from a 94-95 1.6 Fiesta Si is direct plug'n'play for the DESK ECU.... Link to comment Share on other sites More sharing options...
Bertrum Posted April 3, 2012 Author Share Posted April 3, 2012 For your information, a loom from a 94-95 1.6 Fiesta Si is direct plug'n'play for the DESK ECU....Alright mate cheers for advise, gonna wait till 2mz when haynes turns up and c if i can make out my loom in there but if not i will get a loom and ecu, if i do get a ecu aswell do u still recomend a si loom or is there any easier ones, bear in mind it is going in a mk2 xr2 Link to comment Share on other sites More sharing options...
Stu Posted April 3, 2012 Share Posted April 3, 2012 You don't need an ECU, you said you already have a DESK one? Link to comment Share on other sites More sharing options...
Bertrum Posted April 3, 2012 Author Share Posted April 3, 2012 You don't need an ECU, you said you already have a DESK one?Yeah got a desk one but if i get a loom for fiesta si will all the wires and pins locate? For your information, a loom from a 94-95 1.6 Fiesta Si is direct plug'n'play for the DESK ECU....Answer to my question is here lol soz for being so dum mate, i just aint got the foggiest about wiring, im use to a cvh (hamster in a wheel) which is simple. Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now