stoo2000 Posted July 23, 2012 Share Posted July 23, 2012 So, I want to strip the paint, and stone chip type stuff off the bottom of the car. (back to bare metal). I need to use products that have a very long life, that stop/prevent corrosion etc. I know you can't really tell from the picture, but this is the state it's in at the minute (plus a coat of black hammerite)http://www.orioncosworth.co.uk/images/galleries/thebuild2009/1243368716-img_2659.jpg Any suggestions ? Link to comment Share on other sites More sharing options...
SLEEMAN Posted July 23, 2012 Share Posted July 23, 2012 I always recommended either 3M or Upol products I know 3M have some two pack products which seriously are awesome! Link to comment Share on other sites More sharing options...
stoo2000 Posted July 23, 2012 Author Share Posted July 23, 2012 I always recommended either 3M or Upol products I know 3M have some two pack products which seriously are awesome!Any partiular product names/codes I should be looking at ? Link to comment Share on other sites More sharing options...
stoo2000 Posted July 23, 2012 Author Share Posted July 23, 2012 I have been looking at this stuff: http://www.bilthamber.com/electrox I think this is what Trig used on his Orange Escort Link to comment Share on other sites More sharing options...
SLEEMAN Posted July 23, 2012 Share Posted July 23, 2012 Oh bilt hamber is great but for the same price you can pick up around 6 bottles of Upol gravitex or 3m undersealer. Bare in mind you would need a schutz gun for them aerosol is ok but the gun can cake it on better and gets in all the areas proper! Link to comment Share on other sites More sharing options...
stoo2000 Posted July 23, 2012 Author Share Posted July 23, 2012 I didn't really say it in the first post, I'd rather look at something that doesn't require a compressor/gun. I don't think our compressor is upto the job. Link to comment Share on other sites More sharing options...
robbie Posted July 23, 2012 Share Posted July 23, 2012 (edited) http://www.rust.co.uk/index.cfm i used a 10 liter compresser to do cars and not had a issue Edited July 23, 2012 by robbie Link to comment Share on other sites More sharing options...
sidrick Posted July 23, 2012 Share Posted July 23, 2012 That Audi lads are all about Por15 - http://www.por15.com/ http://www.s2forum.com/forum/showthread.ph...p;highlight=por Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now