the_big_man Posted October 30, 2013 Share Posted October 30, 2013 As some of you are aware i'm doing my cossie rep and i had a blue rotten one to start with. Basically that car came with Granada rear discs on it and not too sure what discs and hoses etc go with it. I managed to remove one hose but not the other and the cable is dead. I know everybody goes for the Escort rear beam beam setup (XR3i/RS) or Focus, but as i'm doing a cossie rep and what it as close as possible. The brake calliper sits at the top of the discs rather than to the side if that makes sense (plus these came with the car). any help appreciated Link to comment Share on other sites More sharing options...
scottybo Posted October 30, 2013 Share Posted October 30, 2013 focus caliper sits at the top. check my thread.otherise it might be worth just taken the entire set off a granada and have a play to see what fits Link to comment Share on other sites More sharing options...
the_big_man Posted October 30, 2013 Author Share Posted October 30, 2013 i thought the focus setup sits with the calliper sitting at 2 o'clock? Link to comment Share on other sites More sharing options...
scottybo Posted October 31, 2013 Share Posted October 31, 2013 does cossie one sit directly on top? Link to comment Share on other sites More sharing options...
the_big_man Posted October 31, 2013 Author Share Posted October 31, 2013 cossie ones sit at 12 o'clock on escort cossie, won't be able to do the front as not willing to make it rwd to reverse the hubs just to make the calliper sit the right side lol Link to comment Share on other sites More sharing options...
scottybo Posted October 31, 2013 Share Posted October 31, 2013 cossie ones sit at 12 o'clock on escort cossie, won't be able to do the front as not willing to make it rwd to reverse the hubs just to make the calliper sit the right side lol could you not fit the hubs on the opposite side so the caliper is at the back? i dont know if there would be any issues involved with that but might be worth a shot Link to comment Share on other sites More sharing options...
the_big_man Posted October 31, 2013 Author Share Posted October 31, 2013 Can only reverse the hubs if the steering rack is mounted the other side which can't be done as not enough room due to an engine being in the way Link to comment Share on other sites More sharing options...
scottybo Posted October 31, 2013 Share Posted October 31, 2013 Can only reverse the hubs if the steering rack is mounted the other side which can't be done as not enough room due to an engine being in the way fcuk it then lol no one would ever know apart from us Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now