Jump to content

how hard is it to chanage headlight blubs???


M4TT

Recommended Posts

1 . open bonnet

2. move metal bar on back of light unit off the plastic cap

3. remove plastic cap

4. remove electrical plug from the back of the old bulb

5. remove rubber moisture cover

6. remove old bulb by un clipping the metal spring clip

7. insert new bulb in same orientation (look at pins)

8. replace moisture cover

9. replace electrical plug

10. replace plastic cap

11. slide metal bar over to hold it back together

 

admire new bulbs

 

to do sidelight bulbs just do the same except pull out the sidelight bulb wire and bulb

Link to comment
Share on other sites

Ok first you get the jack and wheel key out of the boot, loosen the nuts on the wheel slightley, locate the jacking point on the sill and jack the car up, undo the wheel nuts the rest of the way and remove wheel, replace with other wheel, put on wheel nuts and tighten, now let the car down off the jack and tighten nuts again to make sure they are secure, put jack and wheel key back in the boot.

 

Jordan

Edited by Jordan
Link to comment
Share on other sites

Ok first you get the jack and wheel key out of the boot, loosen the nuts on the wheel slightley, locate the jacking point on the sill and jack the car up, undo the wheel nuts the rest of the way and remove wheel, replace with other wheel, put on wheel nuts and tighten, now let the car down off the jack and tighten nuts again to make sure they are secure, put jack and wheel key back in the boot.

 

Jordan

u forgot to chock the rear wheels Dangerous Brian :))

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...