starting the epic car cleaning advice please

[steve_sport_scort]

im going start the epic cleaning of may car some time in the next two weeks,

which means putting it up on stands and striping everything off it, (inside and out) and treating any rust/paint problems,

theres a few things that im concerned about,

anyone know how easy it is to remove the rear seats and cards in a 3 door,

is it possible to remove standard side skirts without wrecking em so i can sand down the sill and paint/underseal it.

fuel tank to give that a good clean up and the underside of the shell its sticsk too,

and anyone know how easy it'l be to waxoyl the engine bay panels,

any problems with removing the interior roof lining.

and how easy is it to pull the rubber seals off the bottom of the door openings, cos i wanna waxoyl behind em.

 

also im planning on doing a big f*&k off walk through for this (if anyones interested) so i wanna know if there are any panels that will most likely have rust on, and what areas to do, and any problems i might face,

so post away people

cheers

[Drk_red_Mk5]

gettin seats should be same on 3dr. think its 2torx type bolts on the front bottom side, and they mite well jus pop out with the beack bit.

[steve_sport_scort]

thanks for that mate,

keep em comin

any one know if theres rear wheel arch liners?,

i know the fronts got em, but my rear arches are starting to rust, only lightly but it needs sorted, i ran my hand over the top of the arch lip to see if i could feel how bad the rust is, and theres anoter lip or something just over the top of the arch lip, so i cant rub down the top of it??, anyone know what it is and if theres anything i can do?

[sortedford]

im interested mate as im gonna do it soon on mine,

the tank is 4 bolts

skirts will be rivited on, drill them off

[sortedford]

the rears are double skinned, theres no liner as such that is removeable

[neil]

Rear seats are a few bolts. The plastic door cards are screws and plastic clips which need a plastic pin in the centre pushing through first before they can be removed. Yo will know what I mean when you see them

 

[steve_sport_scort]

the rears are double skinned, theres no liner as such that is removeable

<{POST_SNAPBACK}>

so what'll be the best way to treat that, cos i cant get to the effected area, just spray some waxoyl in

[steve_sport_scort]

any advice anyone?

really want some on the rear arches, im really stumpted on those, i dont want to roll em or have to do any major work, and i dont want to have to pay anything for em to be sorted.