Rich

what is the model of the sub m8y?

so if you conected it to the main feed to the fuse box that should give a reading for the whole car then?

you have to apply to your local LEA for the loan, it doenst matter where u go to uni m8y

i did it myself on my back windows, advice is to keep it wet and soapy, especially the squeggie thing, if thats dry the film will rip. most important thing though is to remove the windows, otherwise the film will wrinkle

Some break down companies wont tow you if you dont have a spare wheel which could have been used instead of something like that

cheers guys

Some Ghia X had ford remote CL fitted as standard towards the end

feel along the bar and there are 2 bolts at the back

say it was done at Mr tyre Ian, its currently being rebuilt so therefore i would assume another powerflow dealer would have to honour the warranty, no harm in asking powerflow about it though

ive been doing this in planning for a while, you need to basically get some ducting to shape around the metal bracket, which basically gives the dash the structure it needs

just brought myself a new carpet and sound proofing for £125

have had all the doors off my car and now im trying to refit them, the drivers side goes on fine bu the passenger side the door hinges dont go all the way into the hinge hole on the car, leaving a 5mm gap in the hinge so the doors wont close. have tried wiggling the door around, hitting the hinges to encourage them into the hole, they just wont drop into the hole fully. am i missing something, anyone have any ideass?

sp30 adds £90 to my insurance

i would put it forward an hour if i was you lol

V62 and £19