Phill_RS Posted June 6, 2011 Share Posted June 6, 2011 Hi guys i just fitted the plasma dials, everything went great dead easy and they work a treat. But then i took the car for a drive to find all the needles were sticking, Instead of going throgh all the hassle of taking everything apart again i just took the glass off the front to sort the problem, but broke the glass in the process just wondering if it will be ok without the glass on or should I try and get a replacment. Thanks Link to comment Share on other sites More sharing options...
Stu Posted June 6, 2011 Share Posted June 6, 2011 It'll get very dusty. Link to comment Share on other sites More sharing options...
SLEEMAN Posted June 6, 2011 Share Posted June 6, 2011 did you stick the dial faces down if not get some double sided sticky tape and stick it down that will prevent sticking needles Link to comment Share on other sites More sharing options...
bad ass cossie Posted June 7, 2011 Share Posted June 7, 2011 sound like you have pushed the needles on to much as i had the same problem with mine take them out again mate and lift the needle up a tiny bit. Link to comment Share on other sites More sharing options...
Craig855S Posted June 7, 2011 Share Posted June 7, 2011 As stu said your dials will get dusty now, and you'll either have to live with that or be very careful when cleaning the dust off. I'd look at replacing the front plastic (scrappy will sell you the plastic face part for pittence i reckon) Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now