Jump to content

Dash needles


-Dan-

Recommended Posts

Hi all right I'm new here and new to fords!! always had vauxhall but now i've had enough off them and there sensors!! I now own an escort van which i really love!! I have used fords in the past but never really owned or modded one, so today off i went down to my local breakers found myself a mk 5 fiesta so i had the digy dash out of that as i didn't have a rev counter and needed a clock as mine was pants!! now onto what i'm after can i have pics of needles in different colours? so show me yours!!! just want to be a bit different i will be putting leds in,,,

 

 

i have tons planned for it so watch this space

 

Dan

Link to comment
Share on other sites

We've moved this topic into the correct section.

 

 

 

sorry see i am that new to here!! don't worry i'll go sit on the naughty step!! lol :cheers:

 

 

You didn't get warned or ticked off it was simply moved to the right location.

You will know know when you need to go on the naughty step lol (some have never been allowed back off it) :pancake:

Welcome to EVO btw. :thumb:

Link to comment
Share on other sites

(some have never been allowed back off it) :pancake:

 

 

?(

 

 

Why exactly do you wanna change the needle colour?

 

No offence but its a bit pointless , unnoticeable and tbh alot more of a pain in the ring to do properly than you might first assume.

 

the only time Ive ever needed to colour my needles was when I replaced the dash lights with precision LED's and gave the needles a coat of luminescent paint so they'd glow with a additional UV LED.

 

the result?.......... shitloads of fiddly messing round for minimal effective results.

 

my advice, change the colour of the back lighting and lose the front lighting if you want to give your dash a more modern feel.

 

http://www.evo-host.co.uk/getimg/25788.jpg

http://www.evo-host.co.uk/getimg/25789.jpg

Link to comment
Share on other sites

(some have never been allowed back off it) :pancake:

 

 

?(

 

 

Why exactly do you wanna change the needle colour?

 

No offence but its a bit pointless , unnoticeable and tbh alot more of a pain in the ring to do properly than you might first assume.

 

the only time Ive ever needed to colour my needles was when I replaced the dash lights with precision LED's and gave the needles a coat of luminescent paint so they'd glow with a additional UV LED.

 

the result?.......... shitloads of fiddly messing round for minimal effective results.

 

my advice, change the colour of the back lighting and lose the front lighting if you want to give your dash a more modern feel.

 

http://www.evo-host.co.uk/getimg/25788.jpg

http://www.evo-host.co.uk/getimg/25789.jpg

um i like but how did you do that??

Link to comment
Share on other sites

um i like but how did you do that??

 

Take the entire unit out.

 

Pop the rear section off from the front perspex section (its two very simply "push-down" catches to do it)

 

remove the individual gauge faces by unscrewing the torque screws at their rear.

 

lay a strip of LED's in the rear of the "white" back (which ever colour you choose) and power via the original bulb connection which are no longer required as the bulbs will be gone.

 

The strips are available on ebay at silly cheap prices, I bought a 48LED strip to do the one in the picture and it cost me £10

 

Ill be doing the same mod to the Rev counter gauges I recently bought off Tez on ere so Ill do I "How-to" as I adapt them........ which also answers Peewee's question quite nicely :pancake:

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...