roboboyo Posted January 19, 2013 Share Posted January 19, 2013 Has Anyone with a finesse mk6 changed their dials to a rev countered model? was just wondering if it was just plug and play? cheers Link to comment Share on other sites More sharing options...
shawdreamer Posted January 19, 2013 Share Posted January 19, 2013 Has Anyone with a finesse mk6 changed their dials to a rev countered model? was just wondering if it was just plug and play? cheers 90% of the time it is a straight swap, the other 10% means running a wire the coil or possibly the correct ecu pin-out (you have to varify with someone in the know which that would be though) Link to comment Share on other sites More sharing options...
roboboyo Posted January 19, 2013 Author Share Posted January 19, 2013 Has Anyone with a finesse mk6 changed their dials to a rev countered model? was just wondering if it was just plug and play? cheers 90% of the time it is a straight swap, the other 10% means running a wire the coil or possibly the correct ecu pin-out (you have to varify with someone in the know which that would be though) Thanks for the reply Mate, Knowing my luck, ill be in the 10% club, lol does anyone know for sure? I have a finesse, that used to be 1600 but now 2ltr Link to comment Share on other sites More sharing options...
shawdreamer Posted January 19, 2013 Share Posted January 19, 2013 Has Anyone with a finesse mk6 changed their dials to a rev countered model? was just wondering if it was just plug and play? cheers 90% of the time it is a straight swap, the other 10% means running a wire the coil or possibly the correct ecu pin-out (you have to varify with someone in the know which that would be though) Thanks for the reply Mate, Knowing my luck, ill be in the 10% club, lol does anyone know for sure? I have a finesse, that used to be 1600 but now 2ltr you might be in luck then, I don't think the 2L mondys came with anything but the rev counter dash setup, so aslong as you used the 2L loom you should be half way there.....though that still doesn't garantee the interior loom is correct I'm afraid. Link to comment Share on other sites More sharing options...
roboboyo Posted January 20, 2013 Author Share Posted January 20, 2013 Has Anyone with a finesse mk6 changed their dials to a rev countered model? was just wondering if it was just plug and play? cheers 90% of the time it is a straight swap, the other 10% means running a wire the coil or possibly the correct ecu pin-out (you have to varify with someone in the know which that would be though) Thanks for the reply Mate, Knowing my luck, ill be in the 10% club, lol does anyone know for sure? I have a finesse, that used to be 1600 but now 2ltr you might be in luck then, I don't think the 2L mondys came with anything but the rev counter dash setup, so aslong as you used the 2L loom you should be half way there.....though that still doesn't garantee the interior loom is correct I'm afraid. Im not useing the mondy loom, just modified my 1600 ecu, Has Anyone with a finesse mk6 changed their dials to a rev countered model? was just wondering if it was just plug and play? cheers 90% of the time it is a straight swap, the other 10% means running a wire the coil or possibly the correct ecu pin-out (you have to varify with someone in the know which that would be though) Thanks for the reply Mate, Knowing my luck, ill be in the 10% club, lol does anyone know for sure? I have a finesse, that used to be 1600 but now 2ltr you might be in luck then, I don't think the 2L mondys came with anything but the rev counter dash setup, so aslong as you used the 2L loom you should be half way there.....though that still doesn't garantee the interior loom is correct I'm afraid. Im not useing the mondy loom, just modified my 1600 ecu, Link to comment Share on other sites More sharing options...
Craig855S Posted January 20, 2013 Share Posted January 20, 2013 I'd really hope all finesses were wired for a rev counter. My '97 1.4 Freedom wasn't (well,the wire was in the ECU plug but not at the back of the dials (probably tie back a few feet away from the clocks but I just ran a fresh wire in, no hardship) Link to comment Share on other sites More sharing options...
roboboyo Posted January 21, 2013 Author Share Posted January 21, 2013 I'd really hope all finesses were wired for a rev counter. My '97 1.4 Freedom wasn't (well,the wire was in the ECU plug but not at the back of the dials (probably tie back a few feet away from the clocks but I just ran a fresh wire in, no hardship) Cheers Craig, Link to comment Share on other sites More sharing options...
roboboyo Posted January 27, 2013 Author Share Posted January 27, 2013 I'd really hope all finesses were wired for a rev counter. My '97 1.4 Freedom wasn't (well,the wire was in the ECU plug but not at the back of the dials (probably tie back a few feet away from the clocks but I just ran a fresh wire in, no hardship) Cheers Craig, Fitted my rev counter dials, and it seems that all finesse models are already wired for the rev counter conversion!!!! happy days Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now