JC Posted March 22, 2011 Share Posted March 22, 2011 calipers look shiny what type of paint did you use? Link to comment Share on other sites More sharing options...
p4u1 Posted March 25, 2011 Author Share Posted March 25, 2011 Well all fitted looking nice and feel alot better after I had to replace a lenth of brake linehttp://i1093.photobucket.com/albums/i421/p4u188/1c282fe7.jpghttp://i1093.photobucket.com/albums/i421/p4u188/bd1f9b7b.jpg Fitted rear beam mount bushes http://i1093.photobucket.com/albums/i421/p4u188/e89cfd80.jpgFront anti roll bar busheshttp://i1093.photobucket.com/albums/i421/p4u188/5ff44baa.jpg calipers look shiny what type of paint did you use? Just a tin of halfords caliper paint Link to comment Share on other sites More sharing options...
lee grout Posted March 26, 2011 Share Posted March 26, 2011 Brakes look really good mate Looking at doing this on mine, originals are nakard and need replacing anyway. Sounds silly but is there a big variation in mondy calipers? If I type into ebay mondeo mk 3 calipers should they be from a specific model type.Also, are they a bolt straight on job? Ive no idea but someone I know done this on his festa mk5 andthey look mint Any info much appreciated. Link to comment Share on other sites More sharing options...
p4u1 Posted March 26, 2011 Author Share Posted March 26, 2011 These are mondeo mk2 2.5 v6 calipers fitted with escort cosworth 4x4 disks you will need to drill out the hub caliper holes to 12mm from the original 10mm there are fitting guides avalible on this forum mondeo mk3 calipers are different Link to comment Share on other sites More sharing options...
Hezz Posted March 26, 2011 Share Posted March 26, 2011 new brakes look fab where are the bushes from and how much?? Link to comment Share on other sites More sharing options...
bongo Posted March 26, 2011 Share Posted March 26, 2011 looking good fella,how did you fit the front arb bushes? ive got to grease mine up,so have to remove them. Link to comment Share on other sites More sharing options...
p4u1 Posted March 27, 2011 Author Share Posted March 27, 2011 Undo ya steering arm to allow abit of room then get a 10mm spanner in to it you will only be able to undo the front bolt and abit on the back witch will allow enuf room to push them along the arb to remove Flo-flex bushes www.flo-flex.co.uk Link to comment Share on other sites More sharing options...
jonyb4 Posted March 30, 2011 Share Posted March 30, 2011 you've put your discs on the wrong way btw Link to comment Share on other sites More sharing options...
p4u1 Posted March 31, 2011 Author Share Posted March 31, 2011 Have I lol didn't notice tbh Link to comment Share on other sites More sharing options...
p4u1 Posted April 6, 2011 Author Share Posted April 6, 2011 Well 100 miles and £100 later I have my st170 rear setup give them a clean up paint calipers same as front and I'm all ready to go Link to comment Share on other sites More sharing options...
p4u1 Posted April 7, 2011 Author Share Posted April 7, 2011 Cleaned my st170 carriers and calipers off for a paint to match the front calipershttp://i1093.photobucket.com/albums/i421/p4u188/4fe5da98.jpghttp://i1093.photobucket.com/albums/i421/p4u188/a743c468.jpghttp://i1093.photobucket.com/albums/i421/p4u188/47c8cc22.jpg Link to comment Share on other sites More sharing options...
Ryoishikawa Posted April 7, 2011 Share Posted April 7, 2011 (edited) nice progess, but i think you will need a st170 handbrake cable now Edited April 7, 2011 by Ryoishikawa Link to comment Share on other sites More sharing options...
p4u1 Posted April 7, 2011 Author Share Posted April 7, 2011 Yeah I do need to mod it to fit to the escort rear beam aswell Link to comment Share on other sites More sharing options...
p4u1 Posted April 14, 2011 Author Share Posted April 14, 2011 http://i1093.photobucket.com/albums/i421/p4u188/7d78db8a.jpg http://i1093.photobucket.com/albums/i421/p4u188/d24437c4.jpg http://i1093.photobucket.com/albums/i421/p4u188/de55b136.jpg http://i1093.photobucket.com/albums/i421/p4u188/2288b1f4.jpg Link to comment Share on other sites More sharing options...
Forest Posted April 14, 2011 Share Posted April 14, 2011 your st170 disc conversion on the rear , what parts will i need for the conversion and are they all bolt on ? Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now