supersport Posted October 21, 2012 Share Posted October 21, 2012 i sorted the blow out, it just needs to soot up to stop it sounding tinny. i'll have a look at what bit's i've got lying around to see if it's any good for a brace. Link to comment Share on other sites More sharing options...
scottybo Posted October 21, 2012 Author Share Posted October 21, 2012 i sorted the blow out, it just needs to soot up to stop it sounding tinny. i'll have a look at what bit's i've got lying around to see if it's any good for a brace. nah its blowing again, i could hear it on the way home, sounded terrible lol and when i got home i left it running n put my head underneath, i could see it spitting all over the place lol Link to comment Share on other sites More sharing options...
bongo Posted October 21, 2012 Share Posted October 21, 2012 i done what you did,(pulled it to the side with a cable tie) Link to comment Share on other sites More sharing options...
JC Posted October 21, 2012 Share Posted October 21, 2012 You can twist the 3 way coolant hose out the way, but make sure its cable tied out the way! the 4-2-1 I had hit the rad fan so i would check it, the reason why i had to fit a slimline fan I got annoyed with my exhaust blowing, exhaust paste didn't seem to work so used some instant gasket did you not replace the exhaust manifold gasket? looks like that one has seen better days, Also i'd heat wrap that manifold Link to comment Share on other sites More sharing options...
supersport Posted October 21, 2012 Share Posted October 21, 2012 take another look at the pic, no gasket on there. i know where it's blowing from, it's the slide joint on the de-cat pipe. Link to comment Share on other sites More sharing options...
scottybo Posted October 21, 2012 Author Share Posted October 21, 2012 yeh we replaced all the manifold gaskets, the ones supplied were pretty turd though tbh! its blowing where the decat pipe fits over the top of the manifold. i hope by solving this it will make a bit more noise! it doesnt make any at the moment lol Link to comment Share on other sites More sharing options...
scottybo Posted October 22, 2012 Author Share Posted October 22, 2012 i think im gna slide that joint off and paste the sh*t out of the inside of it and slide it back together, on a bad note the exhaust is sagged down a little bit but reason being that we are having to make up a custom mount for a little way down the pipe to hold it all up nicely! on a more positive note, my wind deflectors arrived! i think they look pretty good!http://i1085.photobucket.com/albums/j432/scottybo1/wind.jpghttp://i1085.photobucket.com/albums/j432/scottybo1/wind2.jpg Link to comment Share on other sites More sharing options...
redmex Posted October 22, 2012 Share Posted October 22, 2012 i think im gna slide that joint off and paste the sh*t out of the inside of it and slide it back together, on a bad note the exhaust is sagged down a little bit but reason being that we are having to make up a custom mount for a little way down the pipe to hold it all up nicely! on a more positive note, my wind deflectors arrived! i think they look pretty good!http://i1085.photobucket.com/albums/j432/scottybo1/wind.jpghttp://i1085.photobucket.com/albums/j432/scottybo1/wind2.jpgI likey Link to comment Share on other sites More sharing options...
bongo Posted October 22, 2012 Share Posted October 22, 2012 you probably got a blow because the decat pipe on them manifolds are too short, i made sure i had a longer flexi welded into mine to extend it. Link to comment Share on other sites More sharing options...
scottybo Posted October 22, 2012 Author Share Posted October 22, 2012 you probably got a blow because the decat pipe on them manifolds are too short, i made sure i had a longer flexi welded into mine to extend it. it seemed ok when we were putting it all together, i would just weld the fcuker on there but i need to remove it at some point as i want to cut it up and weld the cat back in there, anyone got any ideas why it doesnt make any more noise than a regular exhaust then? Link to comment Share on other sites More sharing options...
tomsy Posted October 22, 2012 Share Posted October 22, 2012 Loving those wind deflectors were they second hand or can you still buy them new i need some. Link to comment Share on other sites More sharing options...
scottybo Posted October 22, 2012 Author Share Posted October 22, 2012 Loving those wind deflectors were they second hand or can you still buy them new i need some. i paid £13 for them including postage from ebay!!!! i havent looked to see if you can still get them new to be honest, im sure someone like JC would be able to tell you though Link to comment Share on other sites More sharing options...
redmex Posted October 23, 2012 Share Posted October 23, 2012 £13Bargain Link to comment Share on other sites More sharing options...
bongo Posted October 23, 2012 Share Posted October 23, 2012 mine definately made it louder,well the decat accounts for most of it. Link to comment Share on other sites More sharing options...
scottybo Posted October 23, 2012 Author Share Posted October 23, 2012 mine definately made it louder,well the decat accounts for most of it. its got a the manifold, decat and amongoose cat back...i would of thought it would make some noise at least....im really disappointed lol Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now