Jump to content

2.0l MK6 Escort 3dr


Naylor2006

Recommended Posts

  • Replies 843
  • Created
  • Last Reply

Top Posters In This Topic

Didn't fancy masking off all the important bits then?

 

all the parts were masked off especially the rocker cover!! the pistons and rubbers were all masked, and so was the threads on the strut brace only the nuts and the bit in the middle were powdercoated! plus for an escort the closest threads where the colour is won't get used! the calipers sliders were masked and they have been regreased so it keeps movement freely. and i have pressured the pistons a bit and they move freely in and out! everything gets double checked and thoroughly cleaned!

Link to comment
Share on other sites

Didn't fancy masking off all the important bits then?

 

all the parts were masked off especially the rocker cover!! the pistons and rubbers were all masked, and so was the threads on the strut brace only the nuts and the bit in the middle were powdercoated! plus for an escort the closest threads where the colour is won't get used! the calipers sliders were masked and they have been regreased so it keeps movement freely. and i have pressured the pistons a bit and they move freely in and out! everything gets double checked and thoroughly cleaned!

 

This was never in question for me, didn't really want to address is as to fear of another row on my thread lol

Link to comment
Share on other sites

Didn't fancy masking off all the important bits then?

 

all the parts were masked off especially the rocker cover!! the pistons and rubbers were all masked, and so was the threads on the strut brace only the nuts and the bit in the middle were powdercoated! plus for an escort the closest threads where the colour is won't get used! the calipers sliders were masked and they have been regreased so it keeps movement freely. and i have pressured the pistons a bit and they move freely in and out! everything gets double checked and thoroughly cleaned!

 

What about the cam cover where the sealing top-hats sit that the bolts go through? Don't look masked off... or the mounting faces for the caliper bolts?..

Link to comment
Share on other sites

well obviously not the top hats, but the top hats do fit back in the holes. i have done several cam covers like that and not had a problem at all no complaints etc and the mounting faces have minimal powdercoat on them so they are still flat and again no problems at all with mounting them, i just advise my customers to use thread lock in the caliper bolts, and usually ford provide new bolts with thread lock and when they bolted correctly no problems at all. all bolt hole are double checked for clearance, and any threaded parts have bolts to protect the threads including the brake hose etc so its a clean tight seal.

 

and yes sidrick i do provide a powdercoating service would you like some done??

Link to comment
Share on other sites

maybe naylor will have some chrome bits to add to the engine bay that will break up the blue a bit lol!

 

Yeh, will be getting chrome battery cover, reservoirs and alike, the power steering and coolant one is £199!

 

For the record I dont think it will be too blue under there, theres plenty of other bits that wont be blue.

 

We'll all find out in the new year anyways.

Link to comment
Share on other sites

Looks really good. Will be nice when under the bonnet. And its no way to much blue!

 

Looks like it could be new year before I get it fitted :(

 

Got a new boot though dude, being painted week after next!

 

Need a blue throttle cable Lee, where did you get your green one from?

Link to comment
Share on other sites

Well today started the rust repair on my sills, I didnt really know how bad they were until we got the side skirt off, anyways heres the before pictures as alot of the time was spent taking the interior out. More pics should follow tomorrow or day after and hopefully it will all be done by Friday :)

 

JC i know you were skeptical so I hope you didnt mis trust me or something but heres the pics you wanted.

 

Hole in driver side floor :(

 

http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/rustysills/2.jpg

 

And at the back :(

 

http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/rustysills/3.jpg

 

Cant remember where this hole was but theres a hole.

 

http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/rustysills/4.jpg

 

Savage..... My man Sean will be working very hard to replace and re seal for me, so glad I found him, he modded his own escort few years back so enjoys working on another one + he knows his stuff!

 

On a lighter note this also arrived to do, inner morettes to fit inidcators into and a new fuel sender to have my fuel gauge going in the right direction lol

 

Thanks to Stevmo and Heavy Right Foot!

 

http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/rustysills/1.jpg

 

I will hopefully show some progress to these lenses soon as long as I dont get distracted.

 

Thanks all.

Link to comment
Share on other sites

Guest
This topic is now closed to further replies.

×
×
  • Create New...