Stu Posted October 26, 2011 Share Posted October 26, 2011 Cool. Pun intended. Link to comment Share on other sites More sharing options...
Naylor2006 Posted October 26, 2011 Author Share Posted October 26, 2011 I think i build the box when I was 16 and since then as ive upgraded the PC components the watercooling bits have to be upgraded too, fatter pipes and faster pump along with a bigger heatercore. Next upgrade will be for Halflife 3, currently the things just a fileserver for my PS3 etc, its on all the time so needs to be silent which it nearly is. Pretty knarly fan bus and light controller at the front that I made years ago too, replaced with a fancy touch screen one now as eventually it failed but by then the mainstream was making units simular. http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/pcpics/currentsetup/pcfront_multi640.jpg Heres the wind tunnel which cools the rad - before I remounted and sealed it all up again. http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/pcpics/currentsetup/radboxside640.jpg Bit of a beast, you can tell I was 16 when I made it http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/pcpics/currentsetup/front.JPG And the one for luck again http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/pcpics/currentsetup/sideleft.JPG No more PC content I promise, just felt bad after the lack of pics recently and the depressive nature of my posts. Link to comment Share on other sites More sharing options...
stevmo3691 Posted October 26, 2011 Share Posted October 26, 2011 at least the cars more or less sorted now and nice looking computer Need to do water cooling on my PC as it doesnt get enough air where it is but I havent worried about it asI havent used it in a while due to motherboard frying and not needing to use it so just using my laptop. Link to comment Share on other sites More sharing options...
Naylor2006 Posted October 26, 2011 Author Share Posted October 26, 2011 at least the cars more or less sorted now and nice looking computer Need to do water cooling on my PC as it doesnt get enough air where it is but I havent worried about it asI havent used it in a while due to motherboard frying and not needing to use it so just using my laptop. Thanks man, yep, more or less, theres always a list. Link to comment Share on other sites More sharing options...
Naylor2006 Posted October 31, 2011 Author Share Posted October 31, 2011 Well its payday but all I can do is book the car in for the sills to be replaced, thats gonna be a fair wack of labour. Cars going in on the 14th Hopefully Tailgate sorted next month!!!! Think im gonna buy caldoofy's and have it resprayed and colour matched, really need this done now, gaping holes arent cool. Link to comment Share on other sites More sharing options...
JC Posted October 31, 2011 Share Posted October 31, 2011 I'd be interested in some before pics of the sills, I don't recall them that bad.... Link to comment Share on other sites More sharing options...
Naylor2006 Posted October 31, 2011 Author Share Posted October 31, 2011 I'd be interested in some before pics of the sills, I don't recall them that bad.... No they weren't, when i first bought the car home and went to quik fit to swap the rubber round it gave me a chance to have a look, they weren't alarmingly bad that's all I can say. The drivers side has a hole and is like shortbread now the other side ain't too bad but might as well replace both, I'm in for the long run here, future proofing I guess. My mechanic took pics so I'll see if he'll send them to me tomorrow, see if he can take some more during the process as well so I have some stuff to show everyone, I don't have any PC pics left But yeh, sure thin I'll sort some pics, hopefully by midweek. Link to comment Share on other sites More sharing options...
SLEEMAN Posted November 1, 2011 Share Posted November 1, 2011 you might as well get the whole of underneath fully checked out and sprayed in undercoat and stonechip to prevent any more rust!! Link to comment Share on other sites More sharing options...
Naylor2006 Posted November 1, 2011 Author Share Posted November 1, 2011 you might as well get the whole of underneath fully checked out and sprayed in undercoat and stonechip to prevent any more rust!! Yeh and then get my rocker cover, strut brace and calipers all powdercoated as well lollercopter I want this car for a long time so yeh man, shall be looking into that! Link to comment Share on other sites More sharing options...
SLEEMAN Posted November 1, 2011 Share Posted November 1, 2011 the lot should be sent out to you this week matey!!! Link to comment Share on other sites More sharing options...
Naylor2006 Posted November 1, 2011 Author Share Posted November 1, 2011 the lot should be sent out to you this week matey!!! Dirty Link to comment Share on other sites More sharing options...
SLEEMAN Posted November 2, 2011 Share Posted November 2, 2011 dirtybit!! Link to comment Share on other sites More sharing options...
Naylor2006 Posted November 8, 2011 Author Share Posted November 8, 2011 I really cant wait to see this stuff on the car!! Money well spent! http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/1.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/2.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/3.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/4.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/5.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/6.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/7.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/8.jpg http://www.dontcallmeshirley.eclipse.co.uk/phils/phils_pics/mynewcar/powder/painted/9.jpg I know alot of people are haters when it comes to loud colour'd calipers but I love it, I cant wait to fit with the blue hose kit too, its gonna look so obnoxious! Thank you SLEEMAN! Link to comment Share on other sites More sharing options...
stevmo3691 Posted November 8, 2011 Share Posted November 8, 2011 I like that. powder coating looks soooo much better than halfrauds calliper paint Link to comment Share on other sites More sharing options...
Naylor2006 Posted November 8, 2011 Author Share Posted November 8, 2011 I like that. powder coating looks soooo much better than halfrauds calliper paint Alot more money though! I love it, paint looks like milk! Link to comment Share on other sites More sharing options...
Recommended Posts